Fluidhaus LLC

vertical hydraulic power unit, 3.5 gpm, 3100 psi, 2 hp 110/220vac 1 phase 5/60hz motor, 5 gallon tank

hydraulic gear motor or pump 8 cc/rev (0.732 in3/rev) rear ports bi-direction sae a mount

hydraulic parallel valve manifold aluminum d05 ng10 (1-6 station), mpa10 series npt

station 4 valve spool

230/460vac 3 phase 3hp 60hz vertical hydraulic power unit, 1-3.5gpm, 3100 psi, 5 gallon tank

hydraulic gear pump sae b flange 55cc/rev (3.35 in3/rev), 40gpm at max speed 2900psi 13 tooth spline shaft rotation

station 2 valve spool

hydraulic proportional valve amplifier card, +/- 10vdc or 4-20ma, single and double solenoid

hydraulic gear pump, mini with tang shaft, 2.1 to 8cc/rev., 2320 to 3335 psi

d05 ng10 valve 3 position with manual lever. closed center

hydraulic gear pump 14cc/rev (.854 cipr) 11 tooth shaft rear ported sae a flange, ccw shaft rotation

cable assembly for hydraulic single or double solenoid valve din 46350 form a 18mm pur polyurethane outdoor rated 12vdc 24vdc 110vac or 220vac

hydraulic flow divider combiner valve, inline, size 6 gpm 12gpm and 19gpm, 3626 psi

float switch, hydraulic, normally closed, dc/ac, low level with din 46350 form a 18mm connector

pfeg pump shaft seal, 7/8" keyed shaft

proportional pressure control valve, <650 psi for pilot control, d03/ng6 mounting, with and without electronics

filler breather cap with dip stick, for sco power units

d05 explosion proof valve, 3 position closed center, 24vdc with manual lever, 4500 psi

proportional valve, d05, d07 or d08 (ng10, ng16, ng25) 2-stage without electronics

station 1 valve spool