fluidhaus

hydraulic gear pump, mini with tang shaft, 2.1 to 8cc/rev., 2320 to 3335 psi

hydraulic gear motor or pump 8 cc/rev (0.732 in3/rev) rear ports bi-direction sae a mount

gravity down valve sae -6 ports flange mount directly to sco power unit. normally closed 110vac. 12vdc or 24vdc

12, 24 or 48 vdc hydraulic power unit 2.6hp 2kw 1.3-3.6 gpm 1100-3200 psi optional valve mounting

hydraulic piston pump variable 18cc/rev (1.1in3/rev), 0-17gpm up 0-36hp 3625psi sae a 2 bolt flange

hydraulic gear pump 14cc/rev (.854 cipr) 11 tooth shaft rear ported sae a flange, ccw shaft rotation

d03 (ng6): wiring box 3-position hydraulic electrical solenoid valve: 18 gpm: 4560 psi: 12vdc 24vdc 110vac

hydraulic directional control valve cartridge c-08-2 common cavity, 2-position 2-way, 24vdc 2-pin deutsch connector sae -6 ports

hydraulic parallel valve manifold aluminum d05 ng10 (1-6 station), mpa10 series

hydraulic cartridge plug c10-2 common cavity

d03 (ng6) or d05 (ng10): hydraulic electrical solenoid valve with manual override: 18 gpm: 4560 psi: 12vdc 24vdc 110vac, deutsch 2-pin connector

hydraulic gear motor or pump 9 tooth shaft 8-26 cc/rev (0.732-1.58 in3/rev) 2-18gpm bi-direction sae a mount

110/220vac 1 phase hydraulic power unit 2hp 1-4 gpm 800-3000 psi 50 or 60hz valves optional

240/480vac 3 phase hydraulic power unit 2hp 1-4 gpm 800-3000 psi 50 or 60hz valves optional

110/220vac 1 phase hydraulic power unit 2hp 1-4 gpm 800-3000 psi 50/60hz (assembly)

coil replacement for hydraulic solenoid valve, 12vdc 24vdc 110vac din and deutsch connector

pfeg pump shaft seal, 7/8" keyed shaft

counterbalance valve cartridge, 15 gpm 4060 psi, 3:1 ratio t-11a cavity

counterbalance - load holding valve d03 (ng6) module, 15 gpm 3000 psi, 3:1 ratio t-11a cavity

hydraulic gear pump sae b flange 55cc/rev (3.35 in3/rev), 40gpm at max speed 2900psi 13 tooth spline shaft rotation