Zurn ZER6000AV-WS1-HYD-MB | Hydro•X Power Sensor Flush Valve | 1.6 GPF

428mm]; Inlet Supply: 1" NPT; Top Spud: 1-1/2" Coupling Activation: Infrared touchless sensor with mechanical override button   Related Variants SKU Flush Volume Water Sense Finish ZER6000AV-WS1-HYD-MB 1.6 GPF No Matte Black ZER6000AV-WS1-HYD-BN 1.6 GPF No Brushed Nickel ZER6000AV-ONE-HYD 1.1 GPF Yes Chrome ZER6000AV-HET-HYD 1.28 GPF Yes Chrome ZER6000AV-HET-DF-HYD 1.28 / 1.1 GPF No Chrome ZER6000AV-WS1-DF-HYD-MB 1.6 / 1.1 GPF No Matte Black   Features & Benefits: Hydro•X Power Technology: The ZER6000AV-WS1-HYD-MB harnesses renewable hydropower from water flow — eliminating battery replacements and hardwiring for lower installation and long-term maintenance costs. EZ Gear Ceramic Cartridge: Gear-driven ceramic cartridge resists debris and buildup, outlasting traditional solenoid valves and reducing service interruptions in high-use commercial environments. Triple Filtered AquaVantage Diaphragm: Chemical-resistant thermoplastic elastomer diaphragm, gaskets, and seals last 8–10 times longer than traditional rubber components, significantly reducing maintenance frequency and costs. Touchless Infrared Sensor with 24-Hour Auto Flush: Hands-free infrared activation promotes hygiene by eliminating touch points, while the built-in 24-hour automatic line flushing maintains system water quality during periods of inactivity.   Compliance and Certifications: Complies with ASSE 1037 / ASME A112.1037 / CSA B125.37 ADA Compliant Certified by IAPMO R&T   FAQ   Q: Does the ZER6000AV-WS1-HYD-MB require batteries or hardwiring for operation? A: No. It uses Hydro•X Power technology, generating power from water flow itself — no batteries or hardwiring are needed. Q: Is this flush valve WaterSense certified? A: The -WS1 variant flushes at 1.6 GPF and is not WaterSense labeled. For WaterSense compliance, consider the -HET (1.28 GPF) or -ONE (1.1 GPF) variants. Q: What is the recommended operating pressure for this flush valve? A: The valve operates between 25 psi (running) and 80 psi (static). Higher running pressure may be required for certain fixtures — consult the fixture manufacturer for details.   NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system. "Hydrate Everyone, Everywhere!"  BottleFillingStations.com | Contact us