Zurn ZER6000AV-ONE-HYD-BN | Hydro•X Power Sensor Flush Valve | 1.1 GPF

57mm]; Inlet Supply: 1" NPT; Top Spud: 1-1/2" coupling Activation: Infrared touchless sensor with mechanical manual override button   Related Variants SKU Flush Volume Water Sense Finish ZER6000AV-ONE-HYD-BN 1.1 GPF Yes Brushed Nickel ZER6000AV-HET-HYD-BN 1.28 GPF Yes Brushed Nickel ZER6000AV-WS1-HYD 1.6 GPF No Chrome ZER6000AV-HET-DF-HYD 1.28 / 1.1 GPF No Chrome ZER6000AV-WS1-DF-HYD 1.6 / 1.1 GPF No Chrome ZER6000AV-ONE-HYD-MB 1.1 GPF Yes Matte Black   Features & Benefits: Hydro•X Power Technology: Delivers renewable, uninterrupted hydropower requiring no batteries or hardwiring, significantly reducing installation and long-term maintenance costs. EZ Gear Ceramic Cartridge: Gear-driven ceramic design resists debris and buildup, outperforming traditional solenoids for lasting, low-maintenance operation. Triple Filtered AquaVantage Diaphragm: Chemical-resistant thermoplastic elastomer construction lasts 8–10 times longer than conventional rubber, minimizing service interruptions. Touchless Hygiene & 24-Hour Auto Flush: Infrared sensor activation eliminates touch points to reduce germ transmission, while automatic daily line flushing maintains system hygiene during inactivity.   Compliance and Certifications: Complies with ASSE 1037 / ASME A112.1037 / CSA B125.37 ADA Compliant WaterSense Labeled (for -ONE 1.1 GPF and -HET 1.28 GPF flow options; CEC & CalGreen Compliant) Certified by IAPMO R&T   FAQ   Q: Does the ZER6000AV-ONE-HYD-BN require batteries or hardwiring for operation? A: No. It uses Hydro•X Power technology, generating renewable hydropower from water flow — eliminating the need for batteries or electrical hardwiring entirely. Q: What is the operating water pressure range for this flush valve? A: The valve operates between 25 psi (running) and 80 psi (static). Higher running pressure may be required for certain fixtures; consult the fixture manufacturer for details. Q: Is this flush valve ADA compliant, and are there installation options for handicap stalls? A: Yes, it is ADA compliant. For handicap stalls, the water supply rough-in can be lowered to 10" with the grab bar mounted at the 36" maximum height. The optional P6000-YB-OSK Offset Supply Kit can also lower the valve height by 1-1/2" for grab bar clearance.   NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system. "Hydrate Everyone, Everywhere!"  BottleFillingStations.com | Contact us