Fotodiox Pro 100mm Filter Holder Only Compatible with Fotodiox Pro 100mm x 135mm Filters and Cokin Z-Pro (L) Series Filters

Description Specs Compatibility Notes Product Highlights: • Holds Filters 100mm-Wide, 2mm-Thick • For Fotodiox 100mm & Cokin Z-Pro Filters • Multiple Built-In Filter Slots • Holds up to 2 Rectangular Filters • Limited 2-Year Manufacturer Warranty The Fotodiox 100mm Filter Holder is designed to accommodate multiple filters in order to help create the shot you envision. It can hold up to two rectangular filters, or one rectangular filter and one round filter such as a rotating circular polarizer. A 100mm Filter System Lens Adapter Ring is required to connect this filter holder to the front of a lens. Back to Highlights Filter Slots Two (2) Product Dimensions 4.7 x 4.8 x 1.1 in (12 x 12.4 x 2.9 cm) 0.2 lb (2.4 oz) Shipping Dimensions 8 x 10 x 1.5 in (20.3 x 25.4 x 3.8 cm) 0.5 lb (8 oz) Manufacturer Fotodiox Inc. Warranty Limited 24-Months • 100mm Filter System Lens Adapter Ring • 100mm Square or Rectangular Filters • The Fotodiox 100mm filter system works with full frame lenses 18mm and greater; wider than 18mm or if the holder is rotated off center axis will have a very good chance of vignetting. • The Fotodiox 100mm filter system requires an adapter ring & filter holder (purchased separately) to hold the filter to your lens. The adapter ring screws onto the front of your lens just like a regular camera filter does. • It is recommended that you remove other filters from the lens before mounting the adapter ring and holder. • Additional standard filters will increase the possible chance of vignetting, especially on wide angle lenses. All pictures are for illustration purposes only. Actual product may vary slightly due to ongoing improvements in design.