Fotodiox Pro 100mm Filters - Compatible with Fotodiox Pro 100mm Filter Holders and Cokin Z-Pro (L) Series Filter Holders

Description Specs Compatibility Notes Product Highlights: • 100mm x 135mm Filter for Cokin Z-Pro (L) Series Filter Holder • High Quality, Super Thick, Multi-Coated Graduated Filter • Premium Grade Optical Polycarbonate Filter (CR39) • Includes Clear Protective Storage Pouch • Limited 2-Year Manufacturer Warranty These graduated filters fit the Cokin Z-Pro (L) Series Filter Holders. It features a soft edge gradation, with +2 stop density on the darkest side, gradually decreasing near the center of the filter allowing for emphasis of foregrounds or backgrounds. Color gradually fades out, so the boundary between the colored and transparent sections of lens will not become apparent even with the lens aperture stopped down. Each Filter comes with a clear protective storage pouch. Back to Highlights Materials Optical Grade Polycarbonate (CR39) Product Dimensions 4 x 5.3 x 0.08 in (10.1 x 13.5 x 0.2 cm) 0.07 lb (1.2 oz) Shipping Dimensions 5 x 7.5 x 1.5 in (12.7 x 19.1 x 3.8 cm) 0.2 lb (3 oz) Manufacturer Fotodiox Inc. Warranty Limited 24-Months • Fotodiox Pro 100mm Filter Holders • Cokin Z-Pro (L) Series Filter Holders • The Fotodiox 100mm filter system works with full frame lenses 18mm and greater; wider than 18mm or if the holder is rotated off center axis will have a very good chance of vignetting. • The Fotodiox 100mm filter system requires an adapter ring & filter holder (purchased separately) to hold the filter to your lens. The adapter ring screws onto the front of your lens just like a regular camera filter does. • It is recommended that you remove other filters from the lens before mounting the adapter ring and holder. • Additional standard filters will increase the possible chance of vignetting, especially on wide angle lenses. All pictures are for illustration purposes only. Actual product may vary slightly due to ongoing improvements in design.