Zinc Drywall Anchor #6

About the product The zinc drywall anchor is a self-drilling wall anchor for drywall. It offers reliable support for wall hangers installed in medium to heavyweight applications.  Zinc wall anchor for medium to heavy-duty art and decor on ⅜” - ⅝” thick drywall board  Measures 1” Compatible with #6 screws (not included) Instructions Drill a pilot hole on the wall using a drill bit that’s slightly smaller than the diameter of the anchor. Be careful not to drill too deeply as this can cause wall damage. Tip: Use masking tape to mark the depth or the length of the screw you will install. Insert the anchor, then tap it lightly with a hammer until it is flush with the wall. With the anchor in place, screw in the item you want to hang. Note: Ensure you use the correct screw size for the anchor and avoid overtightening it as this can damage the anchor. Related Content A Beginner's Guide to Using Wall Anchors