ZENLOCK WEBLOCK

ZENLOCKing safely  The ZENLOCK is a light (200g), strong (60 kN MBS), and reliable new weblock; ideal for any 17-26mm webbing. ZENLOCK - an upgraded technology A bigger progressive diverter with large hole: the spiral diverter reduces the radius of the webbing on the tensioned strand to preserve around 95% of its MBS. The large hole inside can be used as an auxiliary anchor point to connect a ROLLEX with 0.3T DYNEEMA ROUND SLING FOR WEBLOCK A lowered front pin: this reduces the risk of webbing friction damages A safety locking pin system: demands 2 different actions in order to open and unblock the pin Rear Becket: compatible with all metallic and now also with soft connectors such as slings or spanset Soft release slot: allows to connect directly a soft release or any kind of 25mm wide soft connection (I.e. Spanset or Soft shackle). The versatile and best choice This new ZENLOCK shows extra versatile advantages and by implementing a new design and concept, the rigid aluminum spacers are fixed by a screw to avoid any risk of dropping them. This new change in our weblock technology allows any user to easily adjust the slot from 17mm to 26mm.  Inserting a thin webbing do not require any extra manipulation compare to floatable spacers. a) Webbings of 24 -26 mm: no SPACERS in action b) Webbings of 19 -23 mm: one pair of SPACERS c) Webbings of 15 - 17 mm: two pairs of SPACERS The included round head allen key allows user to easily to tighten the screws.   Safety pin The safety pin is made from stainless steel and allowing the webbing to slide easily during tensioning. The reinforced and anodized aluminum head make it resilient to any type of shock and humidity. Unlocking requires a double movement (pressing the button while pulling) for extra security. Includes a fall-arrest cord. The Soft Release Whether you want to release your longline or highline without using a pulley system brake, or you want to set a "soft point" with a LINEGRIP, you definitely need a SOFT RELEASE. This SOFT RELEASE is made of low stretch polyester line, with 4 or 10 m length to distribute the energy during the release. Simply wrap the SOFT RELEASE 6 times and connect it with your two shackles on each side. Attach your linelock on the opposite side of the sewn black loop inside and block it after with the strap. The SOFT RELEASE closure is a high tenacity velcro strap which is also sewn, in order to not lose it during installation. Using The SOFT RELEASE is very easy and can also be useful to pre-tension your line. The Dyneema sling  Get the best out of the ZENLOCK hollow diverter with a DYNEMA webbing sling, to connect a pulley system or create a buckingham tensioning system. With this webbing sling you can connect our ROLLEX to the ZENLOCK and create a pulley system with your slackline. Which connectors are the best to use with the ZENLOCK? Our ZENLOCK is compatible with all standard types of connectors. We recommend 2.2T BOW SHACKLES STAINLESS STEEL, one of the strongest stainless steel omega shackles. Warnings On low tension Slacklines or Highlines, any shock or vibration caused by the slackliner or the wind can cause slight slippage of the webbing inside weblocks. When highlining, tie off webbing tails with a commonly know anti-slip knot for maximum safety. Consult other, more experienced slackliners for the correct know at it may vary depending on the type of webbing or weblock being used.  Safety first The ZENLOCK is not a PPE product. Before setting up a line for the first time with our ZENLOCK, read carefully the instruction manual in ATTACHMENT SECTION.