Z CAM E2 and E2 Flagship Cage

Our Z CAM E2 and E2 Flagship Cage is compatible with  Z CAM E2, E2G, E2-S6, E2-F6, E2-F8 camera bodies. The unique, modular cage is comprised of 6 pieces - 2 Side Plates, 1 Top Plate, 1 Bottom Plate, a USB Clamp, and an HDMI Clamp. All of this weighs in at just under ½ lb! The Side Plates, Bottom Plate, and both clamps are all separate pieces that can be used independent of each other. The Top Plate uses screw ports in the Side Plates to mount securely and can only be used with both Side Plates in place.  The Top Plate attaches to the camera using a ¼ 20” screw and then connects to each Side Plate with a ¼ 20” screw. It has a built in Z-Rail, ¼ 20” screw holes  and ARRI 3/8″ accessory mount for attaching accessories. Each Side Plate has a built in Z-Rail, M6 Rosette and accepts any ARRI 3/8″ accessory mount as well. The Bottom Plate attaches to the Z CAM cameras with two ¼ 20” screws and a locating pin. The Bottom Plate is Zacuto ACT compatible (and Arca-Swiss compatible). The USB Clamp and HDMI Clamp screw directly into the camera. These pieces can be purchased separately as well. This is a must have feature to protect your cabling and USB and HDMI port.  The Z-Rails built in to the top and sides of our Z CAM Cage makes it easy to mount a Tactical Handle on one or both sides. Or, add our unique Zarn, a wooden ball handgrip! Add an SSD Holder to mount an SSD drive, add rods with a ACT Baseplate, or mount your accessories with a Z-Rail Ball Mount. The possibilities are endless with the Zacuto Z CAM Cage. Additional Accessories: SSD Drive Holder- Attaches to the top plate. Metabones Support for E2 camera- screws into the bottom plate of the cage Zarn ACT Mounting Plate ACT Baseplate