BLOX Racing XTREME Subaru Titanium Wheel Studs

Features Manufactured From Ti64 Titanium  Reduce Rotational Mass Corrosion & Fatigue Resistant Each Extended Stud Weighs Approximately 34 Grams Wheel Stud Specs Thread pitch: 12x1.25mm Total length: 78.85mm Thread length: 58mm Head diameter: 20mm Base thickness: 2.85mm We are proud to introduce a solution to common wheel stud failures - our new Blox Racing Xtreme Titanium Wheel Studs. These lightweight wheel studs are manufactured from aerospace grade Ti64 Titanium. We chose Titanium for our Xtreme line, because it is resistant to the constant heating and cooling cycles common to wheels that will destroy steel studs and bolts. Our Xtreme Wheel Studs will not corrode or rust and they offer 50% in weight savings over old school steel studs. Upgrade to our New Titanium Wheel Studs today and never get a failed stud again!  WHAT YOU NEED TO KNOW: > Subaru models up to 2007 do not require the hub to be pressed out to install Blox Xtreme Titanium Wheels Studs; 2008+ models require the hub to be removed. > If you use our titanium studs and titanium lug nuts you must use generous amounts of anti-sieze to avoid galling. > Precision Ti64 spline results in no welding or spinning of the stud in the hub. > Each Extended Stud weighs 34 grams. Compare to the factory wheel stud weight of 37 grams and ARP wheel studs of 68+ grams. Extended wheel studs are available in sets of 10 and single piece set. Single-piece wheel studs are available and are ideal for when replacing only a few old or damaged studs. FYI: Wheel studs must properly be pressed in using a mechanical or hydraulic press.