XPOWER A-5 Multi-Use Electric Air Duster – 100 CFM, 2HP

XPOWER A-5 Multi-Use Electric Air Duster – 100 CFM, 2HP The XPOWER A-5 is a 2HP electric air duster rated at 100 CFM with dual-speed operation at 28,000 or 34,000 RPM. It functions as both a blower and a vacuum, includes 7 nozzle attachments and a 5-foot air hose, has washable filters, and weighs 4.8 lbs. ETL/CETL certified for commercial and residential use. Airflow and Dual-Mode Operation Airflow: 100 CFM at 2HP/8A — high-volume output for a handheld unit; moves debris, dries surfaces, and clears equipment vents effectively. Dual speeds: 28,000 / 34,000 RPM — lower speed for precision electronics cleaning; high speed for automotive detailing and debris clearing. 2-in-1 blower and vacuum — switch between modes to blow debris out of equipment or vacuum it up with the included reusable vacuum bag. 7 nozzle attachments — adapt from broad coverage to pinpoint airflow for keyboards, vents, audio equipment, and vehicle interiors. Washable filters — maintain airflow performance without recurring filter replacement costs; rinse and reinstall. Weight: 4.8 lbs — light enough for extended hand-held use during electronics maintenance or detailing sessions. Applications Across Environments IT departments use the A-5 to clean desktop computers, servers, keyboards, and AV equipment — replacing canned air at a fraction of the per-use cost. Auto detailers use it to clear door seams, air vents, console gaps, and speaker grilles where compressed air tools are impractical. Camera technicians clean sensor housings, lens barrels, and flash units. Hobbyists and model makers use it to clear debris from painted surfaces and printed circuit assemblies. The vacuum mode captures debris rather than redistributing it, which is useful when cleaning in enclosed spaces where blown dust would redeposit on adjacent surfaces. Construction and Certifications The A-5 uses injection-molded ABS housing with dual thermal protection that cuts power if the motor overheats — preventing damage from sustained use at high load. ETL and CETL listing confirms US and Canadian safety standard compliance. The 5-foot cord and lightweight design make the A-5 practical for workbench-mounted or freestanding use without a dedicated outlet bracket. The reusable vacuum bag and washable filters eliminate consumable replacement costs over the service life of the unit. Specifications Model A-5 Airflow 100 CFM Motor 2 HP Current 8 A Voltage 115V / 60 Hz Speeds (RPM) 28,000 / 34,000 Modes Blower + Vacuum Nozzle Attachments 7 included Cord Length 5 ft Weight 4.8 lbs Housing Injection-molded ABS Thermal Protection Dual Certifications ETL / CETL   What's in the Box Tapered flow nozzle Straw adapter Detail brush Standard nozzle Standard brush Flat nozzle Square nozzle Storage bag for the nozzles Documents Spec Sheet Manual