XERO Wall Mount System RO/DI Water Filtration – Three 40-Inch RO Membranes

Wall Mount System for Van, Trailer and Shop InstallsXERO Wall Mount System puts a full pure water setup on a vehicle, trailer or shop wall instead of on the floor. Water passes through a carbon filter, three RO membranes and a DI cartridge before it reaches the pole. Three people can work from it at the same time. Wall Mount System Filtration StagesEach stage handles a different part of the job, and the built-in gauges let you read the result on site. Carbon filter: The 20-inch carbon filter lasts up to 4 months between changes. Three 40-inch RO membranes: They supply the flow behind the three-user rating. Waste-reducing RO design: XERO laid out the RO section to cut down on wastewater. Refillable 20-inch DI tank: Final polishing for spot-free glass, refilled rather than replaced. Inline TDS meter and pressure gauge: Water quality and pressure are visible without a separate tester. Wall Mount System Installation and PowerThe lightweight powder-coated aluminum frame measures 35" x 50", weighs 105 lbs and projects 8 inches from the wall, so it leaves room to move inside a van or trailer. The XERO Wall Mount System runs on tap pressure or on a 12V booster pump. If you plan to use the 12V pump, budget for a battery and battery box, because neither is included. A 6-foot wastewater hose comes with the system for routing RO waste away from the work area. Specifications Brand XERO Part number 209-21-26-XP Shipping weight 150.0 lb