Ring and Hoop Press by Wubbers-Transverse 14

The Wubbers Ring and Hoop Press – Transverse 14 Pattern is a quality steel, 2-part die system with an outer sleeve that lets you quickly form patterned square or round rings and hoops without the need for an expensive hydraulic press. Designed for use with all types of wire, this press produces textured rings and hoops ranging from 13 mm (1/2") inside diameter up to 36 mm (1-3/8") outside diameter. To use, join the ends of your wire, shape it on a mandrel, and place it in the bottom die while seated in the outer sleeve. The top and bottom inner dies each feature a pin that fits into a groove on the outer sleeve, ensuring perfect alignment every time. Place the top die over the ring and strike it with a suitable mallet—your wire ring is shaped in seconds. Features Made of quality steel construction Transverse 14 pattern die design for textured rings and hoops 2-part die with outer sleeve for precise, repeatable results Pin-and-groove alignment system keeps top and bottom dies perfectly matched Forms square or round rings and hoops from all types of wire Size range: 13 mm (1/2") inside diameter to 36 mm (1-3/8") outside diameter Eliminates the need for a hydraulic press Compatible with use alongside a draw plate or pattern rolling mill to create custom pattern wire Use with a weighted rawhide mallet or other suitable mallet Specifications Pattern Transverse 14 Material Quality steel Minimum Inside Diameter 13 mm (1/2") Maximum Outside Diameter 36 mm (1-3/8") Compatible Wire Types All types of wire Ring Shapes Square or round Variants Single configuration Notes For best results, use pattern wire purchased from your supplier or create your own using a draw plate or pattern rolling mill before pressing.