Wrapping Present Door Hanger

PLEASE NOTE: This is a digital machine embroidery design file…NOT an actual item! You MUST have an embroidery machine in order to use this file. Design Details: SIZE: 4 x 4 Hoop Stabilizer Step 1 - Placement for the door hanger and placement for the FOE on the stabilizer. STOP YOUR MACHINE Place the ends of your FOE over the placement stitch so that the loop part is sticking out of your design. Step 2 - Tack down your FOE STOP YOUR MACHINE Place your vinyl/felt on top of your design face up Step 3 - run your design STOP YOUR MACHINE Place the vinyl/fabric you will be using for the back of your hanger on the back of your hoop face up. Step 4 - run the final stitch Remove from your hoop, trim and enjoy! 5 x 7 Hoop Stabilizer Step 1 - Placement for the door hanger on the stabilizer. STOP YOUR MACHINE Place your vinyl/felt on top of your design face up Step 2 - Stitch your design STOP YOUR MACHINE Place the vinyl/fabric you will be using for the back of your hanger on the back of your hoop face up. Step 3 - run the final stitch Remove from your hoop, trim and enjoy! Stitch Map Included in the zip file – Photo step by step tutorial is included for a basic large padded feltie Formats Included in the Zip file: DST, HUS, JEF, XXX, VIP, VP3, EXP and PES If you need another format, please let us know…. If there is any problems with your download please let us know. Please note: This is an embroidery design not a patch. You will need an embroidery machine to stitch out the file. If you have a program you can also change the format if needed. PLEASE NOTE: As with any digital media, there are no refunds! This design may not be shared, sold or redistributed in any format. The digital files may not be altered in any manner