Wraith Front Bumper w/ Trail Bar

Welded Steel Front Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Trail Bar **Some pictures may depict optional add-ons. Specifications: - 115mm wide - Mounts using existing holes and hardware (hardware not included) - Steel construction - welded. - Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT Warn 8274 winch. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: Superficial matte black coating, will scratch under normal use. -Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. *Recommend hardware mounting kits available at the top of the page as an optional add-on.** Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.