GE Refrigerator Evaporator Fan Motor (WR60X21887) (Replaces WR60X10240)

The GE Refrigerator Evaporator Fan Motor powers the fan that circulates cold air over the evaporator coils and distributes it throughout the refrigerator and freezer compartments. It runs continuously during cooling cycles to keep temperatures even and prevent warm spots from developing inside the unit. Important Compatibility Note: Part number WR60X21887 is the current manufacturer-approved replacement for the following discontinued part number(s): WR60X10240. If your appliance documentation or old part uses any of these numbers, this is the correct, updated component for your repair. The GE Refrigerator Evaporator Fan Motor can fail due to worn bearings, seized motor windings, ice buildup around the fan assembly, or general wear from years of continuous operation. When the motor weakens or stops entirely, airflow through the refrigerator drops significantly, making it harder for the appliance to maintain safe food storage temperatures. These symptoms can help you decide if the evaporator fan motor is the source of your problem: - Refrigerator or freezer not cooling properly despite the compressor running - Unusual squealing, rattling, or grinding noise coming from the back of the freezer - Fan blade is not spinning when the refrigerator door is open and the door switch is pressed - Frost or ice buildup concentrated around the fan area - Warm refrigerator section but freezer still partially cold - Refrigerator runs constantly without reaching set temperature - No airflow felt inside the refrigerator or freezer compartment