World’s Best MuralShield | Matte

MuralShield Matte is a conservation coating formulated to protect and preserve acrylic murals. The matte finish provides UV protection, weather resistance, and paint consolidation for new and weathered artwork while maintaining a low-sheen appearance. It serves as an isolation layer and can be top-coated with World's Best Graffiti Coating when sacrificial graffiti protection is required. The aerosol format is intended for smaller projects, touch-ups, and areas where spray equipment is not practical. Key Features: Conservation coating for acrylic mural preservation Matte finish designed to minimize surface sheen Provides UV protection and weather resistance Consolidates weakened acrylic paint layers on weathered murals Suitable for protecting new murals and restoring existing artwork Can be painted over after curing by applying additional MuralShield to newly painted areas Can be used before priming or gessoing concrete, CMU, stucco, and painted or unpainted walls Compatible with artist-grade acrylic paints, fine art aerosols, collage, and digitally printed murals Suitable for uncoated concrete, wood, signage panels, EIFS, stucco, CMU block, and painted or coated surfaces Functions as an isolation layer and should be top-coated with World's Best Graffiti Coating when sacrificial graffiti protection is required Application: Shake thoroughly before and during application. Allow newly painted murals to fully cure before application. Ensure the surface is clean, dry, and free of contaminants. Apply a light fog coat followed by two to three full coats. Allow 20–30 minutes of drying time between coats. Overlap spray passes for even coverage. After MuralShield Matte has fully cured, apply World's Best Graffiti Coating if sacrificial graffiti protection is required. Specs: 15 oz aerosol can Matte Finish Approximately 25 sq ft (2.3 m²) per can for 2–3 coats, depending on surface porosity and application method Recommended Coats: 2–3 Dry Time Between Coats: 20–30 minutes   SDS Sheet