World’s Best Graffiti Coating

World’s Best Graffiti Coating (WBGC) is a water-based, all-weather protective solution formulated to shield a wide variety of surfaces. It offers outstanding defense against spray paint, magic markers, felt pens, pollution, grime, salt, and sea moisture. WBGC is UV-, weather-, water-, and graffiti-resistant while maintaining a transparent, matte finish that is mostly invisible, depending on the surface. This breathable coating prevents graffiti from penetrating into the substrate, offering a life expectancy of up to 7 years, and potentially up to 10 years when properly applied. Designed as a sacrificial coating, it must be reapplied after graffiti removal. Biodegradable according to OECD test 302 B, this product is environmentally safe and suitable for use on heritage buildings. Key Features: • Easy application with spray, brush, or roller • Fast-drying with minimal downtime • Transparent, matte finish to preserve surface aesthetics • Non-toxic and odorless, ideal for heritage and sensitive buildings • UV, water, weather, and graffiti-resistant • Suitable for porous and non-porous surfaces • Biodegradable and environmentally friendly Coverage Guidelines: • Concrete, brick, or similar surfaces: 500 sq ft per gallon per coat • Sandstone, plaster, or other soft absorbent surfaces: 360 sq ft per gallon per coat • Painted surfaces: 640 sq ft per gallon per coat **2 coats recommended  Product Use Instructions: Preparation Ensure the surface is clean, removing all graffiti, road grime, grease, oil, and paint residue. Protect windows and surrounding areas as needed. Application Exterior Protection: Shake or stir well before use. Apply two coats with a roller, brush, or low-pressure sprayer, allowing intermediate drying. Suitable for application on damp (not wet) surfaces. Excess can be washed off with water post-application. Interior Protection: For painted surfaces, apply three coats using a roller or low-pressure sprayer. Do not dilute the product. Dampen walls in hot weather to assist application. Drying Period The surface becomes water- and graffiti-resistant after 2 hours and fully dry after 4 hours, with ultimate protection reached after 72 hours. Please Note: This is a sacrificial anti-graffiti coating, meaning reapplication is necessary after graffiti removal. Graffiti removal can be done immediately on a damp surface. Testing should be performed prior to application, and results may vary depending on surface conditions. This product information is intended as a guide for use of this product. Urban Restoration Group US Inc. or Window Magic Supply cannot give any guarantee for end result achieved. The applicator of the product shall carry out testing and be responsible for the result.    SDS Technical Sheet