Workshop Metalcraft Practical Tool Set

Workshop Metalcraft Practical Tool Set.  The Practical Range of Tools are a good entry point, particularly suited for the DIY/Craft user.  This set works with material 3/8"wide x 1/16" thickness UP TO 3/4"wide x 1/8" thickness.  Set's capabilities can be extended at a later date by the separate purchase of larger scroll benders formers and a Metalcraft Twister. This workshop contains 1 each: Metalcraft Practical RBR (Riveting, Bending, and Rolling Tool) Metalcraft Practical Punch / Shear Tool Metalcraft Scroll Bender MK2/2H Former Metalcraft Scroll Bender MK1/2 Former tape measure spare 1/8" Practical punch pin       Above photos show OPTIONAL tape measuring device being used with Metalcraft Practical Punch/Shear Tool: Set the stop to the required length then cut for consistent measurements every time. The distance of hole positions can now be set from end of metal OR from hole to hole - consistent measurements every time. This photo shows the optional Measuring Device for the Practical Punch / Shear Tool in full length.   Above photos: Punch holes with equal spacing between each hole. Punch holes a set distance from end of metal.   All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool. click HERE for FREE downloadable Practical Manual.