PC-Woody® Ultimate Wood Repair( A + B approx. 1 gal. )

Download PC Woody (Off-white) MSDS Download PC Woody (Light Brown) MSDS Description: PC-Woody® is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody® is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody® formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High “wet grab” or tack of PC-Woody® makes overhead and sidewall work easy without drip or sag. PC- Woody® demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood. Bonds most everything to anything. ***Note: PC-Woody® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt. Mixing Tips: In cold or cool temperatures, place PC-Woody® containers near heat prior to using. PC-Woody® mixes and spreads easier at 80°F than at 40°F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-Woody®. Denatured alcohol is excellent for smoothing applied PC-Woody®. Also use Denatured alcohol to clean surfaces before applying. ***Note: Most epoxies are temperature sensitive and will cure faster at higher temperatures and slower at cooler temperatures. Speed cure with artificial heat. Directions: Using separate knives to remove amount needed, mix equal parts A (off white) and B (light brown) on a flat clean surface until a uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, etc. For best results, rough up the surface PC-Woody® will be bonding to. Normally, no vice or clamp is needed. Prop or tape heavy objects to a wall or ceiling. Applications: Apply PC-Woody® in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample amount of PC-Woody® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps. Denatured alcohol is excellent for smoothing applied PC-Woody®. Also use Denatured alcohol to clean surfaces before applying. After cure: Paint, Stain, Drill, Machine, Sand, File, Tap, or Saw. PC-Woody® has hundreds if not thousands of uses.