Zero-Uplight LED Wall Pack – Type III/IV, up to 3,198 lm (IP65)

Zero Uplight LED Wall Pack – Type III & IV Distributions, Up to 3,198 Lumens The Zero-Uplight LED Wall Pack delivers dark-sky-friendly illumination with full cut-off optics that eliminate uplight. Models provide up to 3,198 lumens (model dependent) with Type III and Type IV distributions for perimeter and façade lighting. 3000K versions are IDA approved, the housing is IP65 rated, and an optional UL 924 emergency battery supports code-compliant egress. Explore more wall pack lights. Zero uplight (full cut-off) Type III / Type IV optics Up to 3,198 lm 3000K IDA models IP65 wet location UL 924 EM (optional) Key Features & Benefits Zero-uplight full cut-off minimizes skyglow and light trespass. Type III/IV optics target walkways, lots, and building perimeters. Output up to 3,198 lumens (model dependent) for clear egress paths. 3000K IDA-approved models support dark-sky objectives. Rugged, outdoor-rated construction: IP65 wet location. Optional UL 924 emergency battery for 90-minute egress. Related Wall Pack Guides Full-Cutoff Dark-Sky Guide Photometric Layout & Spacing Spec Sheet Download Zero Uplight Wall Pack Spec Sheet (PDF) Specifications (Overview) Lumens: up to 3,198 lm (model dependent) CCT: 3000K (IDA models), plus 3500K / 4000K / 5000K options Distributions: Type III and Type IV Rating: IP65 wet location Emergency: optional UL 924 battery (˜90 min) Illumination Output range: 1,745 to 12,393 lumens High-efficacy LEDs up to 123 LPW (5000K models) CCT options: 3000K, 3500K, 4000K, 5000K CRI = 70, L70 > 50,000 hours @ 40°C Electrical 120–277 VAC input standard, 347/480V optional for larger units 0–10V dimming driver included (120–277V only) Optional surge protection (10kVA) and photocontrol (PC) Mounting Mounts to standard 3.5" or 4" J-box Backplate includes bubble level and conduit entry Hinged housing for tool-free access Housing / Finish Die-cast aluminum body with UV-resistant polycarbonate lens Sizes WLZ1 through WLZ10 support mounting heights up to 35' IP65 rated and UL Listed for Wet Locations Options Battery Backup: 700+ lumen output for 90 minutes (WLZ2 and up) BB-IH: Cold-location egress backup to –20°C (WLZ4, WLZ7, WLZ10) LiteLogic: Bluetooth PIR occupancy sensor kit (field installed) SP/SPH: Surge protection options for 120–277V or 347–480V models Warranty / Listings 5-year limited warranty UL Listed for Wet Locations IDA Approved (3000K only), Dark Sky friendly Frequently Asked Questions What is the maximum lumen output of this fixture? The 100W model delivers up to 12,393 lumens in Type III distribution at 5000K. Is this wall pack compliant with Dark Sky requirements? Yes. 3000K CCT models are International Dark-Sky Association approved. What battery backup options are available? Optional emergency battery and cold-location (–20°C) battery backup are available for WLZ2–WLZ10. Can this be used with a motion sensor? Yes. LiteLogic Bluetooth-enabled PIR occupancy sensors are available as field-installed accessories. What type of mounting is supported? The fixture mounts to a standard 3.5" or 4" J-box and includes conduit knockouts and a bubble level.