Wittner Finetune Geared Violin Peg

Upgrade your violin with the precision and convenience of Wittner Finetune Geared Pegs. Designed to eliminate slipping and sticking, these innovative pegs offer smooth, accurate tuning, while preserving the traditional look of your instrument. Standard 1:30 taper for traditional fit Composite and light alloy construction with classic appearance Press-fit installation (no glue required) Only the head and geared shaft rotate during tuning Internal 8:1 gear ratio for smooth, precise tuning Available in different size options: - 7.8mm Violin (for 4/4 - 3/4 size violin) - 8.6mm Violin (for 4/4 - 3/4 size. violin) - 7.2mm (for 1/2 - 1/4 size violin) The pegs are also available in viola sizes here. For proper sizing, check out our infographic. Wittner finetune geared pegs are measured by diameter at ring. Wittner Finetune Peg Made from composite and light alloy material, maintaining the traditional hardwood appearance demanded by professional musicians. Installed by pressing into place without glue. Peg shaft stays in place, and tuning is done by turning peg head. There is no peg/pegbox friction, and peg is not affected by climate and humidity changes. Only the button and the geared middle section of the shaft on which the string is wound, moves. The Fine Tune pegs have an internal gearing ratio of 8:1 for precise tuning. We recommend installation by a professional. Before placing your order, we recommend looking at the sizing chart for proper sizing.