Williams AV Induction loop amplifier with network control

The DL107 NET hearing loop amplifier maximizes modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D, pulse-width amplifier maximizes the efficiency of the unit. This assistive listening system’s design offers a single 9.5 A rms loop output for perimeter loop or single array configuration. A 70-100 V input provides a connection to a distributed speaker/paging system, ensuring announcements are heard by hearing aid users. Meet IEC 60118-4 standards on system performance when integrated into a correctly designed and installed system. The DL107 NET is also tested to IEC Specifications 62489-1 Benchmark Standards. System Includes (1) PLA DL107 – NET Loop Amplifier (1) WLC 004 – Line Cord (US) (1) IDP 009 – ADA Wall Plaque (T-Coil) Features Network control – allows control and calibration of unit remotely with application software High continuous current 9.5 Arms (13.4 Apk) per output continuous LCD Screen with VU metering, easy one-button menu control DSP Audio Processing USB for firmware updates Input mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay Power-save mode Adjustable output delay for multiple amps in large venues Fault warning and active protection against shorted or open circuits and overheating Loop fault relay output XLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced. Standard 1 RU, 19” rackmount Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers. DL207 suitable for phased-array or dual-loop systems; DL107 suitable for perimeter loop or single array. Phased-array mode automatically produces 90° phase shift in slave loop output Meets IEC 60118-4 system performance requirements when integrated into a correctly designed and installed system. Meets IEC Specification 60118-4 (when designed and commissioned properly) Tested to IEC Specifications 62489-1 Benchmark Standards