White C3 Anti-Static ESD Fabric

Material overview White C3 anti-static, static-dissipative fabric for ESD-sensitive cleanroom and laboratory textile applications. The referenced C3 construction is 99% polyester with 1% conductive carbon fiber, 60 inches wide, water repellent, and sold by the linear yard. Recommended applications Cleanroom garments, laboratory apparel, ESD-sensitive electronics handling, covers, work surfaces, and controlled-environment textile projects where the required resistance range and cleanroom criteria are verified. Performance and selection notes The conductive carbon component is intended to help dissipate static and reduce static cling. Effective ESD protection depends on the complete garment or system, grounding method, seams, closures, laundering history, humidity, and current resistance test data. C3 is not a substitute for an exact ESD specification. Confirm surface or point-to-point resistance, cleanroom compatibility, fluid-barrier requirements, wash-cycle durability, and any required standard before use. Specifications for this listing Material 99% polyester / 1% conductive carbon fiber Construction C3 anti-static and static-dissipative fabric Color White Width 60 in Finish Water repellent Sales unit By the linear yard; quantity 1 represents one linear yard Order format Sold by the linear yard. Confirm continuous length, exact construction code, current availability, and technical documentation before ordering for a controlled process. For ESD-critical production, request a current lot data sheet or test result and validate the finished garment or assembly in its actual environment. Fabrication, care, and limitations Use laundering and drying methods approved for the exact C3 construction. Contamination, softeners, abrasion, coatings, and repeated wash cycles can change static-dissipation performance. Test seams, grounding interfaces, closures, and the completed item rather than relying on the fabric name alone. Specification check: The listing identifies C3 anti-static fabric; a compliant ESD system requires current resistance data and validation of the finished item under its intended conditions. Need help with a finished project? Share the intended use, dimensions, preferred material, quantity, timing, and a photo or sketch when useful. NY Tarp can help review material choice and custom-work requirements before fabrication.