Waterlox Marine Gloss Finish

Waterlox Marine Finish-Gloss The origin of our name, Waterlox, stands for "locks out water.” Waterlox Original Marine finishing system is the perfect solution for any and all exterior wood finishing project(s) that are in harmful elements like moisture, direct Ultraviolet rays, salt and fresh water and harsh weather, including: • All Marine Brightwork(Boat,Teak and Wood Work) • Outdoor Furniture. • Exterior Doors and Window Casings. • Garage Doors, Entrances and Trim. • Specially made for boat decks, bright work, spars and other heavy-duty exterior applications, such as exterior doors and garage doors. • Not recommended for use on pressure-treated woods or exterior horizontal surfaces in direct sunlight, such as decks. • Use as a finish coat for a satin sheen, exterior finish over base coat(s) of Waterlox Marine Sealer (TB 3809). Please Note: This product is a finish only. You must first seal your wood with the Waterlox Marine Sealer (TB 3809). Use this product as your final coat to provide a gloss sheen. Maintenance: With Waterlox, maintenance is as simple as applying another coat without any surface preparation other than cleaning. You will also have sufficient time to recoat before the wood becomes unprotected. Please Note: As with any exterior finish that forms a film, if the Waterlox Marine finishing system is left un-maintained, the UV will continue to shrink the film and the film will eventually peel. Features & Benefits: • Tung oil-based - Penetrates surface, easy to maintain, enhances beauty of wood. • Flexible - moves with the wood, does not chip, tolerates wide temperature range. • Water resistant - Holds up to rain, sleet, snow, fresh or salt water. • Resistant to Ultraviolet rays - UV causes the gloss level to fade which is the key to knowing it’s time to re-coat. Finish Details: • Our traditional formulation is product number TB 3940. • Produces a high gloss appearance (90°-95° gloss level). • Formulated as a traditional exterior Tung oil spar varnish. • Like all of our tung oil finishes, 90% of the resin portion of the formula is from renewable, natural resources. • Forms a protective and elastic finish against sun/UV rays, harsh weather and moisture exposure. • Penetrates and waterproofs when used as a finishing system in conjunction with Waterlox Original Marine Sealer (Waterlox Original Sealer/Finish can be used interchangeably). • Easier to maintain than other exterior clear finishes. Coverage Rate: • One gallon covers approximately 500 square feet per coat. • One quart covers approximately 125 square feet per coat. • The number of coats needed depends on the porosity of the wood being finished. • No thinning necessary.