Water Sensor With Relay Contact - 2500/2600 Series

These products are all Made to Order Which means they are non-cancelable and non-refundable Description Water Sensor With Relay Contact Undetected water damage, such as that caused by leaking pipes or corroded water heaters, cost homeowners tens of thousands of dollars each year. Such repairs are time consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains. Using no mechanical parts, the GRI Water Sensors are triggered by a moisture bridge across the sensor contacts. The GRI Water Sensors can be installed to detect a layer of water as minute as 1/16 of an inch in depth. mitter, annunciator, etc. The 2500 Open Loop Sensors use an external power source which will energize a built-in relay contact when water is detected. With this configuration the sensors are not fail safe. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc. The 2600 Closed Loop Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc. Using no mechanical parts, the GRI Sensors are triggered by a moisture bridge across the sensor contacts. The GRI Sensor can be installed to detect a layer of liquid as minute as 1/16 of an inch in depth. Features Features Will detect any conductive non-flammable liquid (Under Carpet) Ideal anywhere water damage could occur Automatic Reset Available in gray only 6 foot jacketed lead standard Custom Lead Lengths Available 24 Volt DC Sensor Available in 5 VDC, 12 VDC And 24 VDC Closed and Open Loop Versions Made In U.S.A. Specifications Specifications Spec Sheet What's In The Box What's In The Box 1 x Water Sensor