Walrus Audio Fundamental Distortion - 3-mode Distortion

Fundamental Distortion The Fundamental Distortion is a 3-mode distortion. It covers a wide range of sounds from dark and doom through sharp cutting leads.   Specifications: Gain The Gain slider sets the amount of gain applied to your guitar signal passing through the fuzz circuit. Tone The Tone slider controls the frequency response of the signal after distortion. Below center boosts highs and above center cuts highs. Volume The Volume slider sets the overall output volume of the pedal. Slide Switch The slide switch allows you to change between 3 distinct flavors of the pedal. Each position has different clipping modes or tone profiles. (Slide Switch) Dark Asymmetric silicon clipping with added high-frequency cut. Think dark and dynamic. (Slide Switch) Si Classic silicon hard clipping diodes. Things get compressed and crunchy. (Slide Swithc) LED LED hard clipping diodes. A dynamic and crunchy sound. Note: The LED clipping mode will be louder due to the nature of the LEDs, so use your volume slider to compensate! Bypass Switch Turns the effect on and off. Bypass LED Illuminated when the effect is engaged. Input Jack 1/4 inch cable from the instrument. Output Jack 1/4 inch cable to amplifier. 9v Jack 9-volt DC, Center Negative, 100mA min.