Wall Mount with Offset Back Plate Adjustable Maxum Series Hinge

Adjustable Feature Allows for Adjustment of Door Closing Position After Installation  Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips Screws Available Upon Request) Self-Centering 0° Return with Adjustment Up to 30° In or Out Solid Forged Brass Construction Precision Machined 300 Series Stainless Steel Components Dual Precision Wound Stainless Steel Return Springs Self-Closing from 25 Degrees  Non-Mouse Ear Design for Added Adjustment  Designed for 3/8" and 1/2" (10 and 12 mm) Glass Wall Mount Hinges Include Matching Finish Stainless Steel Mounting Screws  Allen Wrench Included  Rated at 50 lbs (22.5 kg) per Hinge Additional Product Information: Using Two Hinges with 3/8" to 1/2" Glass the Hinge Will Hold Up to 100 lbs with a Maximum Door Width of 36". Using Three Hinges with 3/8" to 1/2" Glass the Hinge Will Hold Up to 150 lbs with a Maximum Door Width of 36". The Adjustable Maxum Offset Plate Hinge adjusts to accommodate desired angles up to 30 degrees. Simply loosen the Allen Screws on the rear of the hinge, position the door to the desired closing position, then re-tighten the Allen Screws. For best results, use with a strike jamb and position the door to push against the jamb for a snug close. Adjustable Angle Instructions Steps: Use 3 mm Hex Wrench (A) to loosen two screws (B) by turning one circle counter-clockwise. Then proceed with the adjustment. Once you have aligned the door, re-tighten two screws (B).