Wall Mount with Offset Back Plate Adjustable Majestic Series Hinge

Adjustable Feature Allows for Adjustment of Door Closing Position After Installation Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips Screws Available Upon Request) Self-Centering 0° Return with Adjustment Up to 30° In or Out Solid Forged Brass Construction Precision Machined 300 Series Stainless Steel Components Dual Precision Wound Stainless Steel Return Springs Self-Closing from 25 Degrees Non-Mouse Ear Design for Added Adjustment Designed for 3/8" and 1/2" (10 and 12 mm) Glass Wall Mount Hinges Include Matching Finish Stainless Steel Mounting Screws Allen Wrench Included Rated at 50 lbs (22.5 kg) per Hinge Additional Product Information: Using Two Hinges with 3/8" to 1/2" Glass the Hinge Will Hold Up to 100 lbs with a Maximum Door Width of 36". Using Three Hinges with 3/8" to 1/2" Glass the Hinge Will Hold Up to 150 lbs with a Maximum Door Width of 36". Adjustable Angle Instructions Steps: 1. Use 3mm Hex Wrench (A) to loosen two screws (B) by turning one circle counter-clockwise. Then proceed with the adjustment. 2. Once you have aligned the door, re-tighten two screws (B). The Adjustable Majestic Series Offset Plate Hinges has taken our popular Majestic Hinge to a new level. Adjustment to accommodate the desired angle (up to 30º) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired angle. The door can swing 90º inward and also 90º outward (adjusting angle from factory set position will reduce 90º swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5º inside the shower area, thus having the door close snugly against the jamb.