VS4-10 Phoenix Prerunner Series Comp-Style Front Bumper

Our Prerunner Series Comp-Style for the VS4-10 Phoenix is specifically made for the best possible approach angle, which is why it is designed to be used with a chassis-mounted servo winch.  ScalerFab Welded Steel Prerunner Series Comp-Style Front Bumper for VS4-10 Phoenix *Shown with optional Front Fairlead Mount Specifications: - approx. 150mm wide - Trimming of body straight will provide a better fit - Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories) - Steel construction - Hand Made/Welded. - Has slots for adjustable fore/aft mounting Mounting instructions: - Bumper mounts against the frame rails, sandwiched between frame rails and plastic inner fenders.  -Extended mounting rod included. Body pin should be inserted from the bottom with the long end sticking up through the slot on the plastic mount to keep it in place.  -For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.  **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:  -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: Superficial matte black coating, will scratch under normal use. -Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE