Titan Compression Post Base

For concrete, stone or wood surfaces Exceptional appearance When appearance and performance both matter, you need the new "Evolution" Compression Post Base. Use it for support columns that will be highly visible. You want to avoid the ugly appearance of the common "U" shaped post saddles on the market. Made to be used on concrete and stone-installs in minutes! Do not use for guard rails. Use on concrete, stone or wood surfaces Exceptional appearance No visible fasteners or blade cuts Installation Video Specifications Model VPATICP44, VPATICP46, VPATICP66 Material Formed/Welded sheet steel, Black powder coat over hot dip zinc Post Size Nominal 4x4, 4x6 and 6x6 Dimensions Base: 1” tall x 3-½" wide x 3-½" long  Tube: 1-¼" diameter x 4" tall Base: 1” tall x 3-½" wide x 5-½" long Tube: 1-¼" diameter x 4" tall Base: 1” tall x 5-½" wide x 5-½" long Tube: 1-¼" diameter x 4" tall Weight 1 lbs. to 2 lbs.  Fasteners Use maximum ¼" diameter concrete screws such as GRK Caliburn or Tapcon and minimum 2-¼" length or use ¼" expansion bolts for concrete surfaces (fasteners sold separately). Recommended Uses & Code Compliance Residential support columns. DO NOT USE AS A RAILING POST OR FOR LATERAL LOADS. TOP OF POST MUST BE SECURED TO SUPERSTRUCTURE. THIS IS FOR COMPRESSION LOADS ONLY. Composite Decking Pre-drill screw holes before driving screws into composite decking. Composite and synthetic boards are very dense and if holes are not pre-drilled you may snap off the head of the screw. Also pre-drilling holes on wood or composite deck boards anytime a screw will be driven very close to the edge of a board. This will prevent the board from splitting. Recommended Wood Species Common construction softwoods. Hardwoods can be used but boring the center hole requires more skill and effort due to density of wood. Titan Building Products Website Phone Number: 613-224-9477   Installation Instructions Warranty