VPA Omega Broadhead

Say hello to the new VPA Omega Broadhead! A solid, one-piece, precision-machined, American-made broadhead that combines all the desirable features of a single bevel head with the strength of double bevel head. And the greatest feature of all? It’s patent-pending LAYFLAT™ sharpening technology makes it the easiest two-blade ever to sharpen. The smoothly integrated ferrule forms a wedge from tip to tail, designed to hold the wound channel open allowing the arrow shaft to pass through without interference. The sharp Tanto tip cuts on contact, time-tested for penetrating meat and bone. Directly following the tip is a massive asymmetric blade section that uniquely combines the bone splitting action of a single bevel broadhead with the inherent toughness of a double bevel broadhead. After the bone begins to split, the mechanical advantage of the wedge-shaped ferrule acting in concert with rotation of the true single bevel blades cause devastating fracturing of the bone. The sharp single bevel blades then slice through arteries and organs like a fine razor, causing massive bleeding and deep penetration.    Machined from S7 tool steel and hardened to 56-58 Rockwell, the VPA Omega is manufactured from a premium material that improves durability, dependability, and edge retention. The VPA Omega broadhead is stronger than any other Single bevel on the market. Here’s why… Looking from the tip, the first third of the broadhead is an offset diagonally symmetric double bevel at 40 degrees. The following two-thirds of the broadhead is a single bevel at 26 degrees from the factory.   The double bevel portion of the broadhead integrates the blades and the ferrule in an offset diagonally symmetric monolithic unit – creating our patent-pending LAYFLAT™ sharpening technology.  This geometry allows the double bevel blades to initiate rotation through bone and tissue as if it were a single bevel broadhead, while maximizing all the strength inherent in the integrated ferrule and blade design. In addition to making this broadhead extremely easy to sharpen, the LAYFLAT™ sharpening technology allows for the single bevel portion of the blades to be micro-beveled at 40 degrees - if desired by the hunter. This optional microbevel further enhances the durability of the blade edges when encountering bone. This game-changing broadhead sets a new standard for single bevels. Original VPA Omega The VPA Omegas in 100 - 200 Grain feature a 1 1/16" cutting diameter - designed purposefully to maintain excellent flight characteristics while also aiding in deep penetration and minimizing deflection from bone impact. The 250 and 300 Grain models feature a 1 1/8" cutting diameter.  Single Bevels have skyrocketed in popularity over the past couple years, and there’s no questions why — they cause devastating fracturing of the bone. The major drawback of Single Bevels, however, is that they can be extremely difficult to sharpen. Typically you must purchase a jig or tool to maintain the correct angle of the heads when sharpening. With the VPA Omega, that drawback is eliminated. All that is required to sharpen this head is the head itself and a sharpening stone, sandpaper, or whatever you prefer to sharpen with. To sharpen this broadhead, you simply lay it flat and push forward. No jig required - it’s an end to the old way of doing things. Minimal work - maximum results. The VPA Omega is the only single bevel broadhead you can sit in the tree stand and resharpen with ease – no jig, no hassle. This never-before-seen technology makes the VPA Omega revolutionary – it’s quality, dependability, and effortless maintenance makes it unlike any other broadhead on the market.  Shoot, resharpen, reuse, repeat. VPA Omega with Bleeders Following the widespread popularity of our original Omega Broadhead, we're thrilled to introduce the VPA Omega enhanced with a solid, one-piece bleeder blade. The addition of a Bleeder Blade maximizes effectiveness, promoting faster blood loss and deeper penetration, making it the ultimate choice for precision and lethality. The VPA Omegas with Bleeders are currently available in 150 Grain and 200 Grain Right Bevel...with more weight options and Left Bevel options launching soon. These heads feature a 1 1/8" cutting diameter along with a Bleeder Blade Span of .82". The Bleeder is .094" thick -- making it more robust and durable than the majority of bleeder blades on the market. The Bleeder is a Single Bevel with a 35 Degree Bevel. The Bleeder is 1045 Carbon Tool Steel (56-58 Rockwell).  125 Grain Model: Bleeder and Washer Combined Weight 25 Grains --> Broadhead without Bleeder is 100 Grains 150 Grain Model: Bleeder and Washer Combined Weight 25 Grains --> Broadhead without Bleeder is 125 Grains 200 Grain Model: Bleeder and Washer Combined Weight 25 Grains --> Broadhead without Bleeder is 175 Grains Easy to assemble, disassemble, and maintain—sharpen both the broadhead and bleeders flat on a stone for optimal edge retention and sharpness. To sharpen the VPA Omega with Bleeders - follow the same sharpening instructions for the VPA Omega Broadhead. The Bleeder can be sharpened by hand by laying it on the stone at the angle of the bevel, or you can use a jig to hold the broadhead while sharpening. Elevate your hunting game with the VPA Omega Broadhead with Bleeder Blades! Need a replacement collar or bleeder? Get them here.  Note: Match right bevel with right helical vanes/feathers and left bevel with left helical vanes/feathers. Broadheads come with a factory grind. Final sharpening is recommended prior to hunting. Mechanical Advantage of the ferule is 8.5 *VPA Bleeders CANNOT be added to the Original VPA Omega - our Bleeder slides into the ferrule of our Omega with Bleeders Broadhead. This is not a Bleeder that can be slipped onto the threads of your broadhead.