Viking Electronics E-50-SS Video Entry Phone Stainless Steel

E-50-SS Viking Electronics Video Entry Phone Stainless Steel Provide unique front and back door chimes and paging when used with a Viking SLP-1 and C-2000A Use with a Viking K-1900-5 for automatic speed dialing on telephone lines or analog PABX/KSU station ports. Use on an analog PABX station port with programmable ringdown capability Built-in high resolution color video camera with wide viewing. Tilt/swivel adjustments. Wide operating temperature of -30° F to 150° F l Audio and video transmission on one CAT5E cable Compact size: front panel is the size of a typical single gang midsize wall plate Mounting: flush mount in a single gang (1.7" deep x 2.1" wide min) electrical box or surface mount in a Viking model VE-3x5 (not included) Weather resistant features: mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware E-50-SS has vandal resistant features: 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, impact and scratch resistant camera lens, and hex drive mounting screws Mic and speaker volume controls. Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out. Selectable auto answer feature for monitoring. Programmable VOX (mic/speaker) switching speed Speaker volume: approximately 62db maximum @ 1m Power: telephone line powered (18 VDC/20mA minimum) E-50-SS's dimensions: faceplate: 123.8mm x 79.4mm x 4.6mm (4.875" x 3.125" x 0.18"), phone board: 71mm x 46mm x 42mm (2.8" x 1.8" x 1.65") Ring voltage: 25V AC RMS minimum (for auto answer) CPC disconnect time: 300ms minimum E-50 SERIES SPEC SHEET