VIN-FIX Vinyl Ester Chemical Anchor for Concrete Post Bases

VIN-FIX Vinyl Ester Chemical Anchor for Concrete Post Bases One 300ml cartridge secures 3 threaded rod anchor points to concrete. VIN-FIX is CE certified for cracked and uncracked concrete, rated for wet conditions, and approved for seismic zones. The foundation connection that meets code. Connecting timber structures to concrete foundations requires a concrete anchor that performs under real-world conditions. Your foundation may be cracked, wet, or exposed to seismic stress. VIN-FIX is engineered specifically for post-installed threaded rod anchoring to concrete. It’s certified for the job, rated for wet conditions, handles seismic loading, and works across concrete types. The thread-to-concrete bond that builders and engineers specify.   Why VIN-FIX? One Cartridge = 3 Post Locations Each 300ml VIN-FIX tube anchors three threaded rod connection points. Simple math for project planning and material ordering. CE Certified for Concrete Anchoring ETA-20/0363 Option 1 certification covers post-installed threaded rods M12–M16 in C2 seismic performance category. Your connections meet building code without question. Works on Any Concrete Cracked concrete, uncracked concrete, wet concrete, submerged anchor holes, CMU blocks – VIN-FIX performs across all conditions. Vinyl Ester Without Styrene A+ classified for VOC emissions—meets LEED v4 requirements. Safe for interior and exterior use without off-gassing concerns. How It Works Installation Process: 1. Drill hole to specified depth (When using our 7/8″ threaded rod, drill a 1″ hole to 8.5″ deep. This leaves exactly 3.5″ of exposed rod, perfect for using our 8×8 post base anchor kit) 2. Clean hole thoroughly with compressed air and brush 3. Inject epoxy in steady, full strokes 4. Insert threaded rod and allow to cure 5. Cure time: 45 minutes at 70°F (varies with temperature) Once cured, the threaded rod becomes a permanent anchor point. Attach your post base to the rod threads, then connect timber structure to the post base.   Applications Timber Frame Foundations Anchor threaded rods to concrete piers, grade beams, and foundation walls. Provides the structural connection point for post bases and timber columns. New Construction Install anchors before concrete cures (wet concrete rated) or retrofit existing foundations. Works on cracked or damaged concrete where mechanical fasteners fail. Below-Grade & Basement Applications Crawl spaces, basements, and buried foundations—VIN-FIX is certified for wet concrete and submerged holes. SET-3G is not. Seismic Zones C2 seismic performance category rating. Meets code in earthquake-prone regions without additional structural analysis. Mass Timber & CLT Projects Secure timber columns and cross-laminated timber walls to concrete slabs with certified epoxy anchoring.   What You Get VIN-FIX 300ml (FIX300) One cartridge of vinyl ester epoxy (10.14 fl oz, works with standard caulk gun applicators) Pre-sized nozzle for standard application Shelf life: 12 months from manufacturing You’ll also need: Caulk gun Threaded rod Post base hardware (Timberlinx A475 or other connector we recommend) SDS Hammer drill and 1″ SDS bit Cleaning tools (compressed air pump and wire brush)