Versa58 Clip Scale

Add a Pocket Clip to Your 58mm Swiss Army Knife Add a deep-carry pocket clip to your 58mm Swiss Army Knife without permanent modification. The Versa58 Clip Scale snaps onto either side of your knife in seconds and removes just as easily. No glue. No drilling. No damage. Includes a built-in toothpick slot so nothing gets lost in the swap. Available in 6061 aluminum or Grade 5 titanium. Versa58 Clip Scale: What You Need to Know Is this compatible with my Swiss Army Knife? Yes - It is compatible with all 58mm Swiss Army Knives with Cellidor (plastic) scales, including the Classic SD, Rally, Jetsetter, Rambler, Midnite Manager, and Minichamp. Not compatible with Alox models. Will this damage my Swiss Army Knife? No - The Versa58 Clip Scale has a built-in patent-pending Interface Plate with a spring mechanism that engages your Swiss Army Knife's existing mushroom rivets without any modification, adhesive, or deformation. Is this reversible? Yes - The Swiss Army Knife itself is completely unaffected: all tools intact, chassis untouched, brass rivets unharmed. Original Cellidor scales can be reinstalled, though plastic deformation from removal means the original fit may not be as tight as factory. We recommend keeping them as spares rather than counting on a perfect reinstall. What does this replace? The Clip Scale replaces one stock Cellidor scale on either side of your Swiss Army Knife and adds a deep-carry pocket clip. Each Versa58 scale is independent, so you can upgrade one side or both. What tools do I need to install it? None. Pop off your stock scale, then snap the Clip Scale's built-in Interface Plate onto the exposed rivets. The entire swap takes under 30 seconds. Why Upgrade Your 58mm Swiss Army Knife? The 58mm Swiss Army Knife has no pocket clip option from the factory, forcing owners to choose between a keyring, a loose pocket, or a permanent aftermarket mod that risks damaging the knife. Versa58 solves this with a reversible clip scale built on a patent-pending Interface Plate that snaps onto your Swiss Army Knife's existing rivets. No tools, no adhesive, no commitment. Pop it off anytime and your Swiss Army Knife returns to factory condition. Start with the Clip Scale and expand into the full Versa58 modular ecosystem over time. About the Versa58 Clip Scale The Versa58 Clip Scale is the first reversible pocket clip designed for 58mm Swiss Army Knives. Machined from 6061 aluminum or Grade 5 titanium, it replaces a stock Cellidor scale on either side of your Swiss Army Knife and adds a deep-carry pocket clip that keeps your knife secure and accessible. The integrated toothpick slot preserves the accessory you'd otherwise lose in a scale swap. Each Clip Scale has a built-in patent-pending Interface Plate that snaps onto the Swiss Army Knife's existing mushroom rivets using an integrated spring steel mechanism. No tools, no adhesive, no modification. Remove it anytime and your original scale goes right back on. No evidence it was ever there. The clip is reversible: mount it on whichever side fits your carry preference. The clip is designed to clear the Swiss Army Knife's keyring loop, so you keep both carry options: clipped to a pocket or attached to your keys. This addresses a common complaint with aftermarket clip solutions that block the keyring or require permanent hardware. Choosing Your Material The Clip Scale is available in two materials. 6061 aluminum is lightweight, durable, and corrosion-resistant: a practical upgrade from stock Cellidor at $25. Grade 5 titanium offers superior strength-to-weight ratio and a distinctive matte finish at $40. Both versions share the same dimensions and weight. Choose aluminum for a reliable everyday upgrade; choose titanium if material quality and aesthetics matter to your carry. The Clip Scale is part of the Versa58 modular ecosystem. Each scale works independently, so start with one or upgrade both sides. Add a MagMount for magnetic quick-connect capability, or expand into tool modules like the Pocket Flare, Pen Module, or USB-C Flash Drive. Learn more about the full system on https://www.mykeyport.com/pages/versa58. Every component works together. Nothing is permanent. Beyond the Swiss Army Knife The Clip Scale also connects to Versa58 MagMounts for standalone use on a keychain or clipped to MOLLE webbing. Its primary value is as a Swiss Army Knife upgrade, but pairing it magnetically with another module gives you a clippable two-tool carry option without the knife. How Does the Versa58 Clip Scale Compare? Versa58 Clip Scale Specifications Materials: Aluminum variant: 6061 Aluminum Titanium variant: Grade 5 Titanium Dimensions: 14mm x 58mm x 7.8mm Weight: 11g (both variants) Compatibility: 58mm Swiss Army Knives with Cellidor scales, including Classic SD, Rally, Jetsetter, Rambler, Midnite Manager, Minichamp, and other 58mm Cellidor models. Not compatible with Alox models. What's Included: One (1) Versa58 Clip Scale with built-in Interface Plate and integrated toothpick What's Required: A compatible 58mm Swiss Army Knife with Cellidor scales What's NOT Included: Swiss Army Knife (sold separately). Additional Versa58 scales, modules, and MagMounts sold separately. Which 58mm Swiss Army Knives Work with Versa58? Compatible Models: Any 58mm Victorinox Swiss Army Knife with Cellidor (plastic) scales, including Classic SD, Rally, Jetsetter, Rambler, Midnite Manager, Minichamp, and others. Not Compatible: Alox models, 91mm or 111mm Swiss Army Knives, or any non-Victorinox knives. Installation: Tool-free. The built-in Interface Plate snaps onto your Swiss Army Knife's existing rivets. Under 30 seconds. Reversibility: Fully reversible. Remove the Clip Scale and reinstall your original stock scale at any time. No modification to the Swiss Army Knife. What This Product Does NOT Do: Does not replace both scales (one Clip Scale covers one side; each side is independent) Does not add tools or functions beyond the pocket clip and toothpick slot Does not include the Swiss Army Knife, additional scales, or tool modules When to Use the Versa58 Clip Scale Clip your Classic SD inside your pocket instead of fishing for it loose at the bottom Switch from keyring carry to pocket carry in seconds when your setup changes Upgrade from plastic to aluminum or titanium without committing to a permanent mod Carry your 58mm SAK clipped to a shirt pocket or pack strap for quick access on a hike Swap between a Clip Scale for weekdays and your stock scale for weekends without tools Build Your Versa58 Setup Each Versa58 scale works independently. The Clip Scale handles one side of your Swiss Army Knife. If you want to upgrade the other side too, add a Versa58 V Scale in matching aluminum or titanium with a built-in tweezers slot. Want to expand further? Versa58 tool modules like the Pocket Flare mini flashlight, Pen Module, and USB-C Flash Drive snap onto the other side of your Swiss Army Knife the same way. Add a MagMount to build standalone keychain tools from any two modules. [Browse all Versa58 products -- LINK TO PARENT COLLECTION PENDING, Amendment 11] Frequently Asked Questions (FAQs): Versa58 Clip Scale What is the difference between the aluminum and titanium Clip Scale? Both are the same dimensions (14mm x 58mm x 7.8mm) and weight (11g). 6061 aluminum is durable and corrosion-resistant at $25. Grade 5 titanium offers superior strength-to-weight ratio and a refined matte finish at $40. Does Keyport offer a warranty on the Clip Scale? Yes. The Clip Scale is backed by Keyport's one-year limited warranty against manufacturing defects. See the full warranty and return policy at https://www.mykeyport.com/pages/warranty-and-return-policy What is the Interface Plate and do I need a separate one? The Interface Plate is the component that snaps onto your Swiss Army Knife's rivets. Every Clip Scale has one built in. You do not need to purchase a separate Interface Plate unless you want to attach magnetic tool modules. Can I use the Clip Scale without a Swiss Army Knife? The Clip Scale's primary value is as a Swiss Army Knife upgrade. It can connect magnetically to a MagMount for standalone use on a keychain or MOLLE webbing, but it is most useful when installed on a compatible 58mm Swiss Army Knife. Disclaimer We are huge fans of Victorinox, but we are not affiliated with or endorsed by Victorinox AG or any of its trademarks, including "Swiss Army." The modular Keyport Versa58 System is a patent-pending platform designed to work independently or to complement compatible 58mm Swiss Army Knives.