Killer Innovations Velocity Compensator

Velocity Pro Tucked Compensator for Sig P320 Compatibilities: OEM Sig P320 Carry (3.9″ Barrel) or Our Velocity Barrel – https://killer-innovations.com/shop/velocity-sig-p320c-barrel/ OEM Sig P320 X Compact (3.6″ Barrel) or Our Velocity Barrel https://killer-innovations.com/shop/velocity-barrel-for-sig-p320-x-compact/ OEM Sig P320 Full Size (4.7″ Barrel) Tool-less Removal with our Velocity Barrels *Note on Compatibility with OEM Threaded Sig P320 Barrels* Our Velocity for Sig P320 compensators are designed to be fully seated against the thread shoulder to maintain proper alignment to the bore.  OEM Sig threaded barrels have a step that is smaller in diameter than the barrel itself, and this does not provide an adequate thread shoulder for the compensator to seat against. Because of this, we do not recommend using our compensators on the OEM threaded barrels as it may result in the projectile  striking the compensator body as it passes through. To install the compensator, you must ensure that your barrel has a 1/2-28 thread pitch and that you are installing the correct compensator for your pistol. If you are using a Killer Innovations barrel, installation is extremely easy, as the barrel comes pre-cut with indexing slots where the comp will seat against the shoulder and time the compensator. However, if you are installing this compensator on another brand of threaded barrel, additional steps and checks are necessary to ensure safe operation. After installation, you can begin tuning the comp for optimal performance. The blast baffle is adjustable, and tuning can be done by swapping out locking rings or by adjusting the baffle size. The comp is extremely durable and should last for many rounds, but it is recommended to clean it about every 1000 rounds for optimal performance. The Velocity Pro Tucked Comp by Killer Innovations is a top-of-the-line compensator that offers superior performance and durability. If you’re looking to improve your accuracy and reduce recoil during rapid firing, this comp is an excellent choice. SPECIFICATIONS: 7075 T6 Aluminum 1.2 oz 1.345″ Total length .97″ wide 1/2-28 Threads Black Nitride finish on hardware All comps come with the Reduced Port Locking Ring (read more about it here) For use with 9MM only Compatible with: Sig P320 Velocity Pro Tucked Comp Instructions KI Sig P320 Compensator Notch and Dimple Drawing Velocity Comp Tuning Info *Due to some rolling changes in designs made by Sig, there is a chance that our parts may not be compatible with your specific gun, despite being noted as compatible with the variation.  Please test fit parts CAREFULLY to avoid damage, in case of incompatibility.  We will return or exchange undamaged parts. Due to differences in metal composition and finishing processes, Killer Innovations cannot guarantee exact color matches among our accessory items.  For more information please see our detailed explanation.