Vastex PTF-100 DTF Powder Applicator

The PTF-100 Powder-To-Film system (patent pending), also known as a Powder Shaker, uniformly coats DTF films with adhesive powder, improving DTF printing performance and operator safety. Instead of hand-coating DTF films in open plastic containers that expose shop personnel to adhesive dust and require operator time and attention to obtain reliable results, the PTF-100 system provides uniform coverage without dusting and spillage, reducing waste and freeing staff to optimize production time. Purpose-built for DTF printing, the tabletop unit consists of a steel enclosure on a stand, with a clear polycarbonate door set at an angle. It comes with two identical cartridges, each of which can hold approximately 3 lbs (1.4 kg) of adhesive powder. It has a rear mounted exhaust designed to collect adhesive dust particles and create a "negative pressure" condition within the cabinet. The film tray is suspended on special rubber hangers that isolate it from the intense vibration applied to remove excess powder from the film. How too: To operate, a filled cartridge is inserted at the top of the unit, and an empty cartridge at the bottom. An operator positions the wet DTF printed film on the application tray, print side up. Once the polycarbonate door is closed tightly, the operator adjusts the amount of powder released by the duration and number of times the release handle is activated. The top cartridge releases adhesive powder which rains down on the film, ensuring complete and even coverage. After the film is coated to the satisfaction of the operator, the actuator is depressed to start a timed vibration cycle to release any excess powder from the film. When empty, the upper cartridge can be switched quickly and cleanly with the lower cartridge containing all excess powder, reducing exposure while eliminating waste and allowing continuous production until refilling is needed. Benefits: ECONOMICAL: Interchangeable cartridges minimize waste, offers quick and clean refills. VERSATILE: Fits up to 16 x 20 in. films CONSISTENT: Both the angle of powder deflection and timer are adjustable for repeatable results STURDY: Powder-coated stainless steel case and polycarbonate door for years of use DUST-FREE: Sealed for mess-free operation Whats Included: Equipped with rear mounted powered exhaust hood to vent glycol fumes Heat Presses Sturdy Mobile Utility stands to accommodate most DTF equipment. Specifications: Flat top to fit Vastex PTF-100 Powder-To-Film System, and can also accommodate other compact tabletop equipment weighing up to 250 lb (113 kg). 26.8 in. (68 cm) H x 32.3 in. (82 cm) W x 32.3 in. (82 cm) D 55 lbs (25 kg) Applicable Industries: Garments Tote Bags Caps And more! Fabrics: Cotton Polyester PU And more! Compatible With: A4 sheets A3 sheets A3+ sheets 16 in x 20 in sheets