Vanquish Ripper Front Bumper with Brush Guard

Drive OVER the rocks, don't work around your bumper! RC Scale Welded Steel Front Bumper w/ Brush Guard for Vanquish Ripper Specifications: - 130mm width -Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame of the Ripper and the frame rails) -see photos (Longer hardware recommended- hardware not included) - Steel construction - Hand Made/Welded. - Can be drilled to accept winch. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: Superficial matte black coating, will scratch under normal use. -Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. *Recommend hardware mounting kits available at the top of the page as an optional add-on.** Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.