Dynacord V600:4-US – Multi-channel power amplifier for commercial installations

Dynacord V600:4-US – Multi-channel power amplifier for commercial installations Overview Multi-channel power amplifier for commercial installations Highlights ✓Versatile, lightweight four-channel power amplifier at an attractive price point, recommended for background music and announcements in small to mid-sized commercial installations ✓Unique Dynacord technologies for reduced cost of ownership, with low energy consumption and flexible power-load allocation ✓Easy handling and trouble-free amplifier operation – even under demanding power conditions – in a compact 1RU form factor Specifications ELECTRICAL Total rated output power 1 600 W Number of channels 4 Rated output power 1 4 x 150 W Output power 4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing) 500 W / 600 W / 500 W / 600 W Specifications AMPLIFIER 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB) 24.0 dB / 27.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB) > -98 dB / > 100 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ) < 0.1 % CONNECTIVITY Type 2 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E) Loudspeaker output 2 x 4-pin Euroblock, 5.08 mm, female Control port type 1 x 5-pin Euroblock, 3.81 mm, male GENERAL Signal processing Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal) < 20 W Consumption at 1/8 rated output power 115 W Standby mode (APD active) < 1 W Protections Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Product identifiers SKU V600:4-US