Super 8 FRONT Axle - V2

⚠️ Important Compatibility Note: The V2 Super 8 Axles are not compatible with the following V1 Super 8 Axle components: housings, knuckles, diff covers, steering link sets, or axle shafts. Take your micro crawler to the next level with the Super 8 Axles, designed for enhanced performance and reliability on the trail. With improved geometry, wider track width, and refined fitment, these axles deliver maximum stability, increased steering power, and smoother handling—without the usual downsides like servo overload or poor scrub radius. Key Features  +16mm Wider Track Width +8mm per side over stock SCX24™ for increased stability and control. 41° of Steering Larger and stronger axle shafts with a 2.5mm stub shaft (vs. 27° stock SCX24™ with 2mm stub shaft) provide sharper steering and added durability. Pre-Installed 2/12 Overdrive Gear Delivers a 33% overdrive when paired with the matching Super 8 Rear Axle Improved Link & Shock Geometry Refined mounting positions improve articulation and balance. The V2 features a slightly narrower front link and shock spacing (2mm narrower than the V1 Super 8) for better compatibility with a wider range of custom chassis, while still maintaining a wider geometry than stock SCX24™ axles. High-Clearance Housing Design Redesigned housing and differential provide better obstacle clearance and reduce hang-ups on the trail. Compatible with Aftermarket Servo Trays Works seamlessly with most SCX24™ servo trays, including the LGRP™ Tremor and Emax trays. Updated Knuckle Design Features scale detailing, a built-in port for steering bump stop adjustment, and compatibility with an optional brass upgrade for added front-end weight and improved steering feel. Material & Construction Billet Aluminum Housing Billet Aluminum Tie Rod Set with aluminum link balls included What’s Included (1) Pre-Assembled Super 8 Front Axle (1) Billet Aluminum Tie Rod Set with aluminum link balls Spare parts: Link balls, O-rings, and hardware What You’ll Need Servo Mount: Compatible with most aftermarket trays (Tremor or Emax recommended) Hex Adapters: Sold separately, or reuse your own Important Notes Builder’s Axles: Designed for stretched wheelbase crawlers. Using stock-length links may cause binding or limited articulation. Lower Link Recommendation: 60mm eye-to-eye or longer for chassis with triangulated SCX24™-style skids. Servo Recommendation: Works best with Tremor or Emax servos using the LGRP™ Servo Tray. Wheel Hex Compatibility: These axles are not compatible with our 5mm hex adapters. The 5mm hex adapters use a special wheel nut designed for M2 axle shafts, while these axles use M2.5 outer shafts.