UVDTF-FIRESAILOR

UV DTF cup wrap is sized for 16 oz Libbey Glass Cans Listing is for one UV DTF Wrap (cup not included) -Premium printed UV DTF wrap -Permanent and waterproof -Hand wash only APPLICATION INSTRUCTIONS MAKE SURE CUP IS CLEAN BEFORE APPLYING TRANSFER - HAND WASH WITH SOAP AND WATER. DO NOT PREP THE GLASS WITH ALCOHOL BEFORE APPLYING THE TRANSFER OUR WRAPS ARE NOT ALCOHOL FRIENDLY 1. Squeegee wrap front and back before use. 2. Trim down wrap to remove excess material to your preference. 3.Carefully peel/ roll off the backing of the wrap with the design facing down. 4. Place the wrap on the cup make sure the design is in your desired position. Please keep in mind that the adhesive is VERY strong, once it touches the cup you will not be able to change the position. 5. Press the wrap down firmly from the center of the glass outward. Be sure to NOT let the ends overlap. Push out any air bubbles with your hands, or squeegee. 6. Continue to rub all over the wrap with your fingers, use a squeegee tool if you have one. Rub in the design thoroughly to properly adhere to the cup. 7. Carefully begin to peel clear film off VERY slowly, peel close to the wrap and take your time to avoid any issues! Peeling fast can cause the design to have damages. Once the clear film is off you are done! CARE INSTRUCTIONS: We ONLY recommend hand washing. Do not soak in water, or leave in the sink to soak. For best care wash and dry cups after each use. Not dishwasher or microwave safe. Disclaimer: We are not responsible for cup wraps that are applied incorrectly or damaged during application. If there is minor sticky residue you can wash it off with soap and water after 24hrs of applying it.