(RGB+W) Whips (Compatible With Rock Lights)

We now offer 2 options:  Standard 1" Tube:  2ft / 3ft / 4ft / 5ft Thick 1.5" Tube:  2ft / 3ft   Our plug & play RGB+W whips can be added to your RGB+W rock light system or choose a dedicated controller with bluetooth & RF remote which allows dual control via app or hand held remote.  Also allows red/brake and white/courtesy override turned on by a positive triggered wire.  Screw style waterproof connections stay clean and connected.   Add daytime replacement whips here Add whip mounting brackets Controller can go to keyed power/battery if you would like a wiring kit with switch available here   Our 2nd Gen whips are extremely bright and the toughtest on the market.  We wrap our high density ultra-bright LED strand around an inner tube with no space allowing maximum LEDs per inch then encase.  Then sealed in a high strength polycarbonate tube which gives twice the strength and protection.  Check out the video showing them vs a 3lb sledge.  This eliminates issues like moisture inside and broken LEDs from hitting trees, all very common with competitors shrink wrapped whips which are not fully sealed.   If an accident does happen we have the best warranty on the market? 25 yr you can break it, we replace it, un-voidable warranty at no cost to you.     Our whips are manufactured with high quality spring bases & quick disconnects which allow them to absorb the stress.  Our bases include an industry first Viton pressure seal which keep the connection clean, limits movement and wear over time.   We offer two ways to control these lights: No Controller: Add to RGB+W 5 Pin Rock Light System: Plug whips directly into our RGB+W rock light kit and run them together.  Includes needed wiring to add to your system but does not include controller.   Include Dedicated Controller: This option allows you to run whips independently, if your not running our rock light system or do not want them directly linked to your rock lights.  Includes controller with your order.   **WHIP LENGTH IS MEASURED FROM THE TOP TO THE THREADED BOLT IN BASE** PLEASE NOTE THESE WHIPS DO NOT CHASE/STACK, IF YOUR LOOKING FOR THOSE ORDER OUR DOUBLE HELIX WHIPS   DOWNLOAD INSTRUCTIONS & DIAGRAM Click APPLE or ANDROID to Download the app   Dual control via BLEDIM app or hand held remote BLUETOOTH APP CONNECTION:  Download app BLEDIM in the app store. DO NOT connect to the device in your phone settings menu  Once connected you can adjust/create colors and patterns as well as turn on and off, the controller should retain the last used setting when powered off then back on. RF HANDHELD REMOTE PAIR OR LOCK REMOTE: To pair the remote if connection lost or lock it so other remotes cannot control.   Hold green power button. Remove fuse from controller for 5 seconds, place back in. Continue to hold green power button for 3 seconds BRAKE/RED OVER RIDE: Connect blue wire to brake power wire, this will turn on red even if the lights are turned off and will override any current color if already on, we suggest placing on its own switch to only activate when you want it to. COURTESY WHITE OVER RIDE: Connect white wire to switch or cortesy lights, this will turn on white even if the lights are turned off and will override any current color if already on.   Additional instuctions can be downloaded SIZE LENGTH QTY OF LED 1" 2ft 180 1" 3ft 270 1" 4ft 360 1" 5ft 450 1.5" 2ft 300 1.5" 3ft 480