Upright Pintle for Pintle Hinge Systems

The upright pintle is part of our pintle system of gate hinges. This product will work with a strap or screw eye. When ordering the other part of this hinge make sure that the pintle sizes match. For example, if you order an upright pintle with a 5/8" pintle your bolt must have a 5/8" pintle. Both the 1/2" and 5/8" upright pintle use two 3/8" lag screws per upright (not included). The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs. Note: When ordering Pintle Hinge System components, please note that listed sizes, like a 3/4" pintle diameter, are nominal, not exact dimensions. Utilize our nominal sizes to match straps and pintles seamlessly. If you're attempting to match our products with items you already own based on pintle diameter or other dimensions, be aware that doing so is at your own risk due to potential slight variations in manufacturing measurements. Ensure precise matching by using our integrated ordering system to guarantee compatibility and fit. 1/2" Pintle: Upright pintle measures 4-1/4" long x 1-1/4" wide. 100 lb per hinge weight rating. Centerline of pintle is offset 7/8" from the backside of the pintle strap. 5/8" Pintle: Upright pintle measures 4-1/4" long x 1-1/4" wide. 150 lb per hinge weight rating. Centerline of pintle is offset 7/8" from the backside of the pintle strap.