Ultra Guard Water-Based Polyurethane 16oz (473ml) - FUSION

Ultra Guard Waterbased Polyurethane is the ideal protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased resistance to abrasion, ensuring your furniture, worktables, wood floors, and other surfaces look their best for years. Say goodbye to streaks and clouding, and hello to a flawless finish on all your projects! With its water-based, non-yellowing formula, Ultra Guard is perfect for both dark and light surfaces. Superior Compatibility: Perfect for dark and light colors without clouding. High Durability: Reinforced with silica for enhanced protection. Odorless & Non-Yellowing: Maintains the integrity and vibrancy of your surfaces. Easy Application: Excellent coverage with a smooth finish. Versatile Application: Suitable for interior water-based paints and all types of bare wood. Available in both Flat and Satin sheen. Enhances Colour: When applied, the product goes on whitish and dries transparent, enhancing both light and dark colours. Available in Flat/Matte or Satin      Basic Application Instructions:  Prepare the Surface: Painted Surfaces: Clean and degrease with TSP Alternative. Wait 24-48 hours after painting before applying. Bare Wood: Sand smooth with 120-grit sandpaper, ensuring it's free from wax and contaminants. Remove dust before application. Mixing: Mix thoroughly with a stick and wait 20 minutes before applying. Application: Use a synthetic bristle brush or a microfiber roller. Sand lightly with 220-grit sandpaper between coats. Number of Coats: Painted Surfaces: 2 coats recommended. Bare Wood & Non-Sealing Stains: 3 coats for optimal protection. Drying Times: Between Coats: Allow 3 to 48 hours. After 48 hours, lightly sand before the next coat. Bare Wood: Apply the second coat after 3 hours without sanding. Before Sanding: Wait 6 to 8 hours before sanding for a smooth finish. Clean and degrease painted surfaces with TSP Alternative; wait 24-48 hours if freshly painted. - Sand bare wood with 120 grit. - Apply with a synthetic brush or microfiber roller. - Sand lightly with 220 grit between coats. Faq's Application Tool  Brush or Staalmeester roller Location  Interior Re-coat Time  3-48 hours* Top Coat  No additional top coat is required.- this is made strong enough for floors and table tops Clean Up  Odourless Solvent - can also be used to thin the coats and create a faster drying/cure time. Coverage  6m2  — 65ft2 per can Finish/Sheen  Flat or Satin Recommended Uses Virtually any surface with minimal prep required Can Be Applied To It can be applied on interior water-based paints and all types of bare wood. It is suitable for furniture, worktables, wood floors and other interior surfaces. Can Be Painted Over After 10 days curing, with a clean and scuff sand. Test first to ensure adhesion prior to tackling your full project. How to Prep Prior to application all surfaces should be free of wax, varnish or other types of contaminants. Always remove dust after sanding prior to application. Cure Time  7-10 Days Maintenance/ Cleaning Gentle cleaners ( mild soap / warm water )