UltiMaker S7 Pro Bundle

UltiMaker S7 Pro Bundle Grades: N/A Number of Students: N/A Number of Lessons: N/A Contact Hours: N/A Additional Resources: N/A   Highlights: Unleash True 24/7 3D Printing Transform the UltiMaker S7 into a manufacturing powerhouse. With 3X the material capacity. Automated filament handling. Humidity-controlled storage. Material Handling on Autopilot Easy front-loading for 6 spools Stored at 40% relative humidity Automatic material switching Compatible with 190+ filaments   All the Uptime in the World Material Station Designed for ultra-low maintenance and tested to be left unattended, the Material Station allows the UltiMaker S7 to print longer – day or night. Loading material into the Material Station takes seconds – not minutes. Simply open the door, drop the spool into a bay, and guide it to extruder 1 or 2. During a print, any spool that is not being used can be switched out.   3D Print with More Materials, More Easily Each of the Material Station's material bays have NFC readers and reinforced prefeeders for integration with UltiMaker Cura and Digital Factory. Every spool is kept at 40% relative humidity, making it easy to realize more 3D printing applications with almost any combination of polymers and abrasive composites.   Plus Every Feature of the UltiMaker S7 Set and forget. Out of the box. What's New? PEI-coated flexible build plate Integrated Air Manager More  accurate inductive probing Click and print with 280+ materials   Easy printing. Easy breathing. Integrated Air Manger Independently tested to remove up to 95% of ultrafine particles from every print.* Not only does this increase air quality peace of mind... It also boosts print quality thanks to its fully enclosed build chamber and single glass door. *Tested by Fraunhofer WKI. Only including UltiMaker materials.   Print removal speeds to flex about Flexible build plate Skip using glue and remove parts effortlessly with the PEI-coated flexible build plate. 25 magnets and 4 alignment pins allow you to replace it perfectly – reducing the time spent using the UltiMaker S7 and increasing productivity.   Proving makes perfect Inductive build plate sensor A new inductive print head sensor probes the build plate with less noise and more accuracy. And automatic tilt compensation removes the need for thumbscrew bed calibration. Together, these allow you to start a print and walk away – confident in a perfect first layer.   Packed with UltiMaker's latest technology Print with 280+ materials Unlock limitless potential 3D printing applications. These material profiles have been tested for thousands of hours by their manufacturers and users in the field.   Cura integration Access the UltiMaker Cura features that speed up your workflow and increase print success – like intent profiles, easy remote printing, and more.   Backwards file compatibility If you own an UltiMaker S5, your entire digital library of S5 print files will work flawlessly on the S7 - with no reslicing needed.   Anti-flood sensor The redesigned print head detects potential flooding earlier. It also includes stronger magnets to ensure the print core door stays closed.    1080p camera Mounted higher to give a better view of the first layers when remote monitoring. Monitor your print in high resolution remotely via UltiMaker Digital Factory.   Future-proof investment The UltiMaker S7 will get better with age. New 3D printing workflow improvements are already planned via regular software and firmware updates for years to come. What’s Included: (1) UltiMaker S7 3D Printer (1) Ultimaker Material Station (1) 0.4 AA Print Core (installed) (1) 0.4 BB Print Core (installed) (1) Additional 0.4 AA Print Core (1) PEI Coated Flexible Build Plate (1) Spool Holder with Material Guide (1) Power Adapter & Cable (1) Ethernet Cable (1) USB Stick (3) Nozzle Cover (1) Tough PLA Filament (750g) (1) PVA Soluble Support Filament (750g) (1) Oil & Grease for Maintenance (1) Hex Screwdriver (2 mm) (1) XY Calibration Sheet (1) Quick Start Guide (1) Safety & Warranty Booklet Technology Requirements/Specifications: UltiMaker S7 Pro Bundle Tech Specs: Dimensions: Build Volume: 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches) Assembled Dimensions: 495 x 500 x 1190 mm (19.5 x 19.7 x 46.9 inches) Print Technology: Fused Filament Fabrication (FFF) Compatible Filament Diameter: 2.85 mm Weight:  46.7 kg (103 lbs) Maximum Power Output: 500 W   Printer Properties: Layer Resolution: 0.25 mm Nozzle: 150 - 60 micron 0.4 mm Nozzle: 200 - 20 micron 0.6 mm Nozzle: 300 - 20 micron 0.8 mm Nozzle: 600 - 20 micron XYZ Resolution: 6.9, 6.9, 2.5 micron Feeder Type: Dual-geared feeder, reinforced for composite materials Display: 4.7-inch (11.9 cm) color touchscreen Print Core Replacement: Swappable print cores Print Head: Dual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection. Nozzle Diameters: 0.25 mm, 0.4 mm, 0.6 mm, 0.8mm   Operation Parameters Filter Technology: Replaceable EPA Filter Air Extraction Rate:  1 - 50 m³/h (35 m³/h nominal rate for most materials at 23 °C) Filter Efficiency: Up to 95% Material Capacity: 6 spools Compatible Spools:  Width: 50 - 70 mm (2 - 2.7 in)  Outer diameter: 197 - 203 mm  (7.8 - 8 in)  Core diameter: > 98 mm (3.8 in) Nozzle Temperature: 180 - 280 °C Nozzle Heat-up Time:  < 2 minutes Operating Sound:  < 51 dBA Build Plate Leveling:  Advanced active leveling with more accurate inductive sensors Build Plate:  PEI-coated flexible steel build plate Build Plate Heat-up Time:  < 5 minutes (from 20 to 60 °C) Operating Ambient Temperature:  15 - 32 °C (59 - 90 °F) Non-operating Temperature:  0 - 32 °C (32 - 90 °F)   Ecosystem Supplied Free Software:  UltiMaker Cura - print preparation software UltiMaker Digital Factory - printer management software Supported OS: MacOS, Windows, and Linux Plugin Integration: SolidWorks, Siemens NX, Autodesk Inventor Supported File Types:  UltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable Formats: G, GCODE, GCODE.gz, UFP File Transfer: Wi-Fi (2.4 and 5 GHz), Ethernet, USB   Safety and Compliance Certification: CE, FCC, VPAT, RoHS, REACH, CB, BIS, KC, PSE, RCM, SRRC, MIC, NCC, Safe unattended professional use Security Certification: ISO/IEC 27001 certified   Service and Support Training: Training for the UltiMaker S7 is available online or via UltiMaker's dedicated network of local service partners. Warranty Period: 12 Months Expert Support: Market-leading technical support via email, phone, or from our global community is available to you in your language and timezone. Extended Support: Online resources, extensive manuals, material technical and safety data sheets (in multiple languages), a detailed knowledge base, and much more.   Special Notes and Considerations: **EDU Pricing: Please contact sales@stemfinity.com‚ to find out if you or your organization qualifies for educational pricing.