ULTIM8™ TRIO - Ultimate Resin Tools

Description Contents & Tech Install & Use Tackle resin mess like a pro with the Ultimate Kit for Resin Clean Up. This all-in-one solution includes three essential tools designed to make your resin workflow faster, cleaner, and easier: • ULTIM8™ FUN – Ultimate Funnel for Resin: Say goodbye to spills and wasted resin. This precision funnel makes pouring resin back into the bottle clean and hassle-free. • ULTIM8™ WYP – Ultimate Spatula for Resin: Scrape, scoop, and smooth with ease. Built for durability and precision, this spatula handles even stubborn resin residue without scratching your equipment. • ULTIM8™ VAT – Ultimate VAT Cleaning Tool: Clean your resin vat thoroughly and safely. Its curved edge is perfect for reaching every corner, helping you maintain your printer and avoid contamination. Whether you're a seasoned resin printer or just getting started, this kit gives you the right tools to keep your workspace clean and your prints sharp. What's Included in the Ultimate Kit for Resin Clean Up: 1 ULTIM8™ VAT 1 ULTIM8™ FUN 1 ULTIM8™ WYP 1 Mixing Blade 1 Long Blade 1 Short Blade +ULTIM8™ VAT Specifications Die cast aluminum alloy Grit Blasted, Oxidized, Anodized 40 x 40 x 80mm tall 64 g +ULTIM8™ FUN Specifications Dimensions: Ø83 x 132 tall +ULTIM8™ WYP Specifications ULTIM8™ WYP Handle: Material: Co-injected polypropylene (PP) Dimensions: 76 x 40 x 178 mm Long Blade: Material: Injection molded first-grade silicone Dimensions: 25 x 76 x 7 mm Mixing Blade: Material: Injection molded first-grade silicone Dimensions: 25 x 76 x 7 mm Short Blade: Material: Injection molded first-grade silicone Dimensions: 15 x 76 x 7 mm Attention: when working with resin always use the appropriate eye protection and gloves to avoid contact with the resin. +ULTIM8™ VAT Instructions Click here for the downloadable instructions. Steps for Use: +Preparation Raise your build plate toward the top of the Z-axis. If your resin has been sitting for more than a few days, mix it thoroughly to prevent separation, which can lead to incurable areas. Use a soft silicone spatula, such as Wham Bam’s ULTIM8™ WYP, to gently stir the resin in the vat, ensuring a homogeneous solution. While mixing, check for any hardened pieces in the vat; if found, carefully remove and dispose of them. +Screen Cleaning Place your ULTIM8™ VAT base down toward the corner of your vat, it should be positioned in such a way that 75-80% of the tool overlays the screen and the rest overlays the border such that it provides a great corner peel. Use a light pressure down while swirling slightly the ULTIM8™ VAT to ensure the bottom releases and makes contact with the FEP. Use your machine control panel to find the screen clean function and activate it. Hold down the ULTIM8™ VAT while the cleaning cycle is active. When finished, use a cardboard or tray as a drip catcher and lift the cured resin layer using the handles of the VAT. Let it drip, or hang it using a drip holder or Whammy head holder. +Clean Up When done dripping, remove the tool and resin. Peel cured resin off the ULTIM8™ VAT and dispose of it. Drop the VAT in IPA for a final clean. If resin remains in grooves, leave it overnight in IPA. You’re ready to print! Note: If you observe chunks or particles in resin, remove the vat, strain using a funnel like ULTIM8™ FUN, and clean thoroughly. +ULTIM8™ FUN Instructions Click here for the downloadable instructions. Please note: Upon initial receipt of your ULTIM8 FUN, it may require reshaping due to potential deformation caused by heat or conditions during shipping. Simply massage the funnel, and it will return to its original shape. If stored long-term folded, it may deform slightly again. Here is an adapter for narrow-mouth bottles. To use: +Resin Filtering To filter resin from vat to bottle, place the ULTIM8™ FUN into the bottle and insert a paper conical filter. Lock top tabs on the funnel hooks if present. Pour resin. Dispose of the cone and wipe with IPA. +IPA Filtering Use conical filters for rough pours, then insert our 3D-Printable shelf with Ø110 fine filter paper for final IPA filtering. High-grade silicone resists all chemicals. Tip: Pour IPA into a glass jar to settle particles via sunlight for 2-3 days. Decant and filter through FUN for ultra-clean IPA. +ULTIM8™ WYP Instructions Click here for the downloadable instructions. To use insert one of our included blades: +Mixing Blade to Mix If your resin has been sitting for more than 12 hours, mix thoroughly to avoid defects. Follow these steps: Raise build plate to top Z position. Mix with WYP + Mixing Blade: slow, steady strokes. Apply downward pressure to contact FEP and stir thoroughly. Avoid Over-Spill by controlling your speed. Check for resin chunks: remove and filter with a funnel like ULTIM8™ FUN. +Long Blade to Wipe Follow these steps: Remove the vat. Initial wipe: use Long Blade to clear large resin areas without scratching. Edge cleanup: target corners and borders gently. FEP wipe: minimal pressure for safe cleaning. Final pass: ensure no residue remains. +Short Blade to Filter Use Short Blade for filtering in tight spaces. Combine with 3D-printable basket for better collection. Steps: Install optional basket inside WYP. Angle WYP + Short Blade at vat edge. Drag blade gently along FEP to direct resin over blade. Inspect basket regularly. Clean Up: All parts are resin- and IPA-resistant. Leave submerged in IPA post-use, then dry and store.