Dynacord U240:1-US

Dynacord U240:1-US Overview Power amplifier 240W, 1 channel Highlights ✓Full power output supporting 4Ω, 8Ω, 70 V and 100 V ✓EMG override input, ensuring critical messages are heard clearly ✓Contact override with 2-tone chime for attention-grabbing alerts ✓120 Hz high-pass filters to customize audio output and eliminate unwanted low-frequency noise ✓Space-saving compact ½ rack design, providing versatility without compromising performance ✓Remote activation of standby mode with Remote OFF (Stand by), enhancing energy efficiency Specifications Electrical Mains power supply Voltage 100 VAC - 240 VAC, 50/60 Hz Power 800 VA Consumption Standby (Remote OFF active) 1.25 W Idle mode 10 W / 12 W Remote power (ON/OFF Stand by) 2-pin, Eurostyle, contact closure Performance Frequency response, -3 dB ref. 1 kHz Any input to output <10 Hz — 22 kHz Distortion <1% @rated output power, 1 kHz Output stage topology Class D Equalization Bass shelving ±12 dB / 150 Hz — 3 dB (100 Hz) Treble shelving ±12 dB / 5 kHz — 3 dB (10 kHz) Filter LO-CUT permanently f=20 Hz, 12 dB/oct. LO-CUT switchable, can be activated f=120 Hz, 12 dB/oct. Specifications General Front status LEDs Protect (Red) Protection, short circuit Peak (Red) 1 dB before clip (input and output) Signal (Green) Input and output signal Call (Green) EMG Power (Green) Power on condition DIP switches EMG (HiZ/Line level), HPF (120 Hz), Output (HiZ/LowZ), Amp mode (70 V/100 V; 4Ω/8Ω) Protections Amplifier Audio limiters, high temperature, DC, HF, short circuit, over current protection Switching mode power supply (µPC controlled) Mains over/under voltage protection, inrush current limiter, mains over current, high temperature Remote power OFF Contact closure Product identifiers SKU U240:1-US