Two Notes OPUS Amp Sim / DynIR Engine

The OPUS now comes with three additional Preamps when registering! Enjoy the new AVIATOR, Tanger and eldorado. All you need to do is connect the OPUS to your desktop, and the Torpedo Remote program and accept the firmware update prompt. Simulations Exquisite TSM Power amp simulation with 4 tube amp models (6L6, EL34, EL84 and KT88), Pentode / Triode, Push-Pull (PP) ‘Class AB’, or Single Ended (SE) ‘Class A’ power amps On-board DynIR Engine for class-leading cabinet simulation with dual-miking facilities, 8 microphones per cabinet and 12 room emulations Pro-grade suite of essential DSP-powered processors and effects including an EQ, Enhancer, Noise Gate and Reverb Dual Static IR Loader and Acoustic DI with 40+ premier Acoustic Impulse Responses included. Pre-Loaded Cabinet Simulations Pre-loaded with the OPUS-Series DynIR Cabinet Collection featuring 32 Cabinets including captures from Steve Stevens, Dave Friedman, Pete Thorn, George Lynch and Phil X. Preset Locations The pedal has 99 preset locations and an exclusive collection of 40+ artist-series presets from the likes of Pete Thorn, Michael Nielsen, Jack Gardiner, Tom Quayle, Adam Steel, John Browne, Jay Leonard Jay and many more! Wireless Integration with the Torpedo Remote App Wireless Bluetooth and USB integration with Torpedo Remote (iOS, Android, MacOS, Windows) for expert-level tone shaping, preset management and real-time auditioning of 500+ DynIR Cabinets. Input / Output Amp/Inst/Line Input: 1/4″ jack unbalanced (TRS) Input Impedance: AMP :160kΩ unbalanced / 300kΩ balanced LINE : 37kΩ unbalanced / 55kΩ balanced INST. : 1MΩ unbalanced Max Level (No Input Pad): AMP: 26.1dBu LINE: 11.3dBu INST.: 2.8dBu Max Level (With Input Pad): AMP: 36.2dBu LINE: 20.8dBu INST.: 12.3dBu Max Admissible Power For Amplifier Connection: “IN LEVEL” Switch Set To “AMP” “TO SPEAKER” output connected to a speaker rated at 16Ω No input pad: 15.2W With input pad: 100W “TO SPEAKER” output connected to a speaker rated at 8Ω No input pad: 30.3W With input pad: 100W “TO SPEAKER” output connected to a speaker rated at 4Ω No input pad: 60.5W With input pad: 100W Aux In: 1/8″ (3.5mm) TRS jack Input Impedance: 29kΩ TO SPEAKER Output*: 1/4″ Jack balanced (TS) *Unprocessed, unbuffered DI Output*: XLR balanced Max level: 10dBu Output Impedance: 600Ω *Protected against +48V phantom power Line Output*: 1/4″ (6.35mm) TRS jack Max level: 10dBu Output Impedance: 600Ω *Not Protected against +48V phantom power Headphone Output*: 1/8″ (3.5mm) TRS jack Max output power: 300mW under 100Ω Output impedance: 33Ω USB Connector: USB-C 2.0 Memory DynIR Capacity: 64 DynIR Memory Card: 256Mb Micro-SD included Up to 32Gb cards supported Digital Audio AD/DA Converters: Studio-grade 24-bit / 96 kHz Bandwidth (-1dB): 30 Hz – 19 kHz Dynamic Range ratio: 101dB Internal Processing: 32-bit floating-point Latency: 2.2 ms (Line Input to Line Output) Power Power input connector: Connector: 2.1mm x 5.5mm Polarity: Center negative Voltage: 12V DC Current: 200mA Power consumption: approx. 2W Supplied adapter: Connector: 2.1mm x 5.5mm Polarity: Center negative Input Voltage: 100-240V AC , 50-60Hz Output Voltage: 12Vdc Max. Current: 2000 mA