Coolant GimGripper4™ - TSC Universal CNC Spindle Gripper

Our Through Coolant GimGripper™ is the go-to in-machine automation solution for CNC machine-tending for machines with Through Spindle Coolant. The Spindle Gripper goes into the machine’s ATC (automatic tool changer) just like any other tool. Once a piece of stock is ready to be loaded, the gripper is automatically loaded into the spindle, the machine moves its axes over the piece of stock, and the CNC Spindle Gripper clamps on the stock. The GimGripper’s fingers are Normally Open and closed by turning on through coolant. All GimGrippers™ ship as complete ready-to-operate kits. The included FastFinger™ Universal Plates provide incredibly fast setup for a wide variety of prat sizes, and the included Rubber Compression Pads enable preloading in the Z-Axis for excellent part repeatability in the Z Axis without undue load on the machine’s spindle bearings. Our Grippers have a 3/4” Shank with an included screw-in extension. You can easily integrate the M-Code pneumatic control of the Gripper using our MCodeAir™ Kit. All of our Spindle Grippers are best to pair with AutoVise ™ line of Automated Workholding. Either use our all-in-one  GripFlipGrip™ Two Op Automation Module that provides two AutoVise air vises and a Flip Station in one integrated unit. To flip your parts, use our QuickFlip™ Pneumatic Part Flipper. For machines without Through Air or Coolant, you can use our Patent-Pending Roto-GimGripper™ that passes air in through the FloLink™ manifold block.