Trailmaster TM31 PRO 250, W/ Head Light. 5 speed manual, 34 inch seat height, Electric Start , Inverted forks, Adjustable Shocks

The all-new TM31 PRO 225cc Pit/Dirt bike is the newest exciting off-road product from one of the industry's largest and most innovative companies  Trailmaster.  The TrailMaster dirt bike offers a superior frame design, improved suspension, and the industry's longest 6 months/6,000 miles warranty on engine and transmission.  This all-new dirt bike brings together design features found on bikes that cost five times as much. Longer throw suspension, adjustable shocks, and inverted front forks all come standard in this PRO model.  This is the first true dirt bike from TM.  Longer frames and extended suspensions give the bike more suspension for the ruts and rougher terrain than pit bikes do not handle very well. The engine comes equipped with a Japanese-style carb, custom exhaust, and heavy-duty clutch assembly. All are designed to maximize the power plant and give years of long-lasting fun.  Compare to Apollo DB36 and XPRO 250cc This is a full-size dirt bike made for trail riding, off-roading, or just cruising.  This is a complete line of dirt bikes for the whole family.  The 110cc TM 10, the TM 11, and the 125cc TM 27 and TM 29, and the 300cc TM 31, TM 36, TM 38 feature top-quality workmanship.  From the 10"  to  21" front rims, to the thought put into the design, these bikes are clearly the top choice for 2022.  Electric start is a feature that is usually only available in larger much more expensive bikes.  Only the highest quality engine components are used in the air-cooled engine Trailmaster has a proven track record of over two decades of providing outstanding service to all of our customers.  The engineers at Trailamster have been working on these bikes for three years to get them to the market. They are here are they were worth the wait.    Main Features: Powerful Zhongshan 223cc air-cooled engine Electric and kick start, 5-gear manual clutch Lightweight, Steel Tube Frame 53.1 “ wheelbase and 34.6” seat high Front tire 19”/Rear Tire 16” Dual Piston Caliper, 240mm Disc front brake Φ51*Φ54-830mm Inverted Hydraulic Forks, 150mm Travel front shock 450mm Spring Pre-load Non-Adjustable Rear Shock  Large 2-gallon fuel tank LED Headlight  CA customers: this item is NOT CARB-approved, but you may use it on your private land. TrailMaster Dirt Bike Model Driver group Size data Engine Transmission Main Features   max.weight Wheel Base Seat height engine size Starting clutch Tires Front / Rear TM10 150LB 39.37'' 24.41'' 110cc Kick Start Automatic Clutch ,N-1-2-3-4 2.5x10 2.5x10 TM11 150LB 39.37'' 24.41'' 110cc Electric Automatic clutch, One gear 2.5x10 2.5x10 TM15 150LB 40'' 24.4'' 110cc Kick & Electric Start  Automatic Clutch ,N-1-2-3-4 2.75x12 3x10 TM21 170LB 41.54'' 29.13'' 125cc Kick Start Automatic Clutch ,N-1-2-3-4 60/100-14 80/100-12 TM22 170LB 41.54'' 29.13'' 125cc Kick Start Manual Clutch, N-1-2-3-4 60/100-14 80/100-12 TM23 170LB 41.54'' 29.13'' 125cc Kick & Electric Start  Automatic Clutch ,N-1-2-3-4 60/100-14 80/100-12 TM24 170LB 42.3'' 32.7'' 125cc Kick Start Manual Clutch, N-1-2-3-4 70/100-17 90/100-14 TM27 200LB 49.8'' 33.5'' 125cc Kick Start Manual Clutch, N-1-2-3-4 70/100-17 90/100-14 TM29 200LB 49.8'' 33.5'' 125cc Kick & Electric Start  Manual Clutch, N-1-2-3-5 70/100-17 90/100-14 TM31 53.1'' 34.6'' 223cc Kick & Electric Start  Manual Wet Multi-Plate, 5gears 70/100-19 90/100-16 TM33 59'' 37'' 223cc Kick & Electric Start  Manual Wet Multi-Plate, 5gears 80/100-21 110/100-18 TM36 59'' 37'' 279cc Kick & Electric Start  Manual Wet Multi-Plate, 5gears 80/100-21 110/100-18 TM38 59'' 37'' 298cc w/ balance shaft Kick & Electric Start  Manual Wet Multi-Plate, 5gears 80/100-21 110/100-18   Specification Engine Type ZSCB250D-G, Single Cylinder, 4-Stroke, Air Cooled Displacement 223 ml Max Power 12/7000 kw/r/min Max Torque 17.5/5500 N.m/r/min Compression Ratio 9.3~9.9:1 Shift Type Manual Wet Multi-Plate, 1-N-2-3-4-5, 5-Gears Bore and Stroke 65.5 x 62.2 mm Min.Fuel Consumption ≤354(g/Kw.h) Start Type Electric & Kick Start Carburetor PE28 Ignition Digital CDI Transmission #520 Chain, FT: 13T/RR: 47T Sprocket PERFORMANCE Front Fork Φ51*Φ54-830mm Inverted Hydraulic Forks, 150mm Travel Rear Shock 450mm Spring Pre-load None-Adjustable Shock Front Wheel Aluminum Rim, Gravity Cast Hub, FT: 1.6 x 19 Rear Wheel Aluminum Rim, Gravity Cast Hub, RR: 2.15 x 16 Front Tires 70/100-19 Rear Tires 90/100-16 Front Brake Dual Piston Caliper, 240mm Disc Rear Brake Single Piston Caliper, 240mm Disc DETAILS Frame Lightweight ,Steel Tube Frame Swing-Arm Tube High Strength Steel Swingarm; L=560mm Handle Bar Tapered Aluminum  #6061 Overall Size 78"X32"X45.7"/1980x810x1160 mm Packing Size 67.3"X17.5"X34"/1710x445x860mm Wheel Base 53.1"/1350 mm Seat Height 34.6"/880 mm Ground Clearance 13"/330 mm Fuel Capacity 7.5 L / 2 Gal. N.W 231lbs/105KG G.W 297lbs/135KG   Warranty THE MANUFACTURERS WARRANTY COVERS PARTS, ENGINE ONLY FOR ALL PRODUCTS AS FOLLOWS: OFF ROAD: ATV'S, UTV'S, BUGGIES, GO CARTS AND DIRT BIKES offer 3 MONTHS PARTS, 6 MONTHS ENGINE WARRANTY, Kartquest.com will supply new or rebuilt replacement parts in exchange for defective parts for a period of 3(three) months, as well defective engines for a period of 6(six) months from the date of purchase at no charge. Buyers will need basic repair & basic setup skills such as using tools; replacing nuts & bolts, filters, light bulbs, fluids, adjustments, etc. If you don’t have this ability we suggest using a mechanic to assist you with your needs. Our tech support Hotline is available to assist you. THIS LIMITED WARRANTY COVERS THE FOLLOWING PARTS ONLY: ENGINE: All internal lubricated parts, i.e. Pistons, piston rings, piston pins, connecting rods, rod bearings, camshaft, camshaft bearings, timing chain, crankshaft, crankshaft main bearings, oil pump, water pump, valves, valve springs, valve guides, valve seats, valve lifters and valve push rods. Additionally, the engine head and cylinder will only be covered if damage is caused solely as a result of the mechanical failure of one or more internal lubricated components listed above. (Broken gears any damage from outside impacted is not covered warranty) ENGINE CASE: The Engine case itself will only be covered if the damage caused was solely as a result of the mechanical failure of one or more of the internal lubricated components listed above. (Broken gears any damage from outside impact is not covered warranty) DRIVE SYSTEM: All internal lubricated parts contained within the drive axle housing case, i.e. differential, differential gears, drive shaft, drive axles, CV joints, axle bearings, reverse gears and output shafts. The drive axle housing as well as the reverse gearbox housing, if damaged solely as a result of the mechanical failure of one or more or the internal lubricated components contained the drive axle housing will be covered. (Any bent, broken, or damage by outside impact is not covered warranty) FUEL SYSTEM: For carburated vehicles; Carburetor, vacuum fuel pump, intake manifold, fuel tank and fuel petcock. For fuel injected vehicles; Fuel injectors, fuel pump, fuel rail and fuel pressure regulator. ELECTRICAL: Stator, stator pickup, magneto, voltage regulator\ rectifier, CDI, starter relay\ starter solenoid, starter motor, coil, distributor assembly and injector relay. COOLING SYSTEM: Radiator, radiator cap, thermostat, thermostat housing, temperature indicator switch, cooling fan motors; water pump and water pump housing. BRAKES: Calipers, drum housings, drum brake linkage, reservoirs, rotors, and lines. CHASSIS: Frame, swing arms, A-arms, steering controls, (if not caused by jumping or impact.) TRANSMISSION (Automatic or Standard): All internal lubricated parts contained within the transmission case, i.e. flywheel, hydraulic shift linkage, kick start spindle, kick start secondary gear and transmission gears. The transmission case itself will be covered if the damage was solely as a result of mechanical failure of one or more of the internal lubricated components contained within the transmission case. (Improper shifting of gears by not coming to stop complete can cause damage to internal gears. (""This cause is not covered warranty"") WHAT IS NOT COVERED: The following is a list of items not covered by the warranty policy. This list is not all inclusive and may be modified at any time. Batteries, Belts, Brakes and Brake Pads, Chains, Clutch, Foot peg mount, Hand Levers, Hoses, Lights, Mirrors, Plastic Body, Seats, Shocks, Spark Plugs, Tires, Transmission. COVERAGE AND LIMITATIONS: Initial assembly and preparation must be preformed in accordance with the Consumer Motor Vehicle Delivery Preparation and Inspection Form that is provided by the manufacturer. Additionally, all work must be performed by a professional mechanic (i.e. engine repair shop, motorcycle shop, or local auto repair shop) or an authorized Dealer of the manufacturer to assure your vehicle is in good working condition. Upon completion, you must mail in the Consumer Motor Vehicle Delivery Preparation and Inspection Form signed by the technician that performed the service. You will need to provide proof of this service when filing a warranty claim, so (end user) must keep your receipts. Subject to the limitations stated in this agreement, Kartquest.com agrees (at its sole discretion) to replace a covered component if the covered component fails as a result of one or more of the internal lubricated parts within the component stated warranty period from the date of purchase, while the component has been used under the conditions and in the manner specified by its original manufacturer. Keep in mind these off-road units are built for recreational use only. Your claim may be denied under the following circumstances: Misuse or abuse of the vehicle, i.e. Jumping Stunt riding Modification of any kind Racing Riding at constant wide open throttle (over revving the engine) Unit is used as a rental Damage is caused by an accident Product is used in a manner that it is not designed for Rider abuse Improper adjustment\operation of the clutch, i.e. dragging, causing premature burning of the friction plates Improper adjustment\operation of brakes. Driving with parking brake on. Improper gear engagement, i.e. engaging reverse will moving forward Improper maintenances, i.e. Lack of routine maintenance Repairs performed improperly, Use of incorrect lubricants Improper initial set up Use of aftermarket parts for repair The following items are not covered: Tires, rims, body panels, fuses, forks, shocks, gaskets, light bulbs, seats, CV Boots, oil filter, air filter, fuel filter, filters, clutch wear parts, cables, drive belt, chain, spark plug, any part made from rubber, belts, brake linings and/or pads, batteries, sprockets, external springs, clips, nuts, bolts and fasteners. HANDLING OF WARRANTY CLAIMS: FOR PARTS: All Parts warranty issues must be processed through https://kartquest.com/pages/part-request  or if directed by the manufacturer. You must produce a copy of your original invoice showing the model number, vehicle identification number and date of purchase on the invoice, as well as a copy of your Consumer Motor Vehicle Delivery Preparation and Inspection Form to warranty your product directly. All defective parts must be returned to Kartquest.com or the manufacturer as directed for inspection and verification of defect. Kartquest.com reserves the right to decline any warranty claim based on the criteria listed in the COVERAGE AND LIMITATIONS portion of this warranty. FOR ENGINES: All Engine warranty issues must be processed through Kartquest.com or if directed through the manufacturer of the unit purchased. In ether case, after obtaining an RMA number from Kartquest.com, you will be provided with a return shipping label. The motor must be removed from the vehicle, safely packaged and shipped to our repair facility located at the address listed on the shipping label. Kartquest.com or the manufacturer reserves the right to decline any warranty claim based on the criteria listed in the COVERAGE AND LIMITATIONS portion of this warranty.